Advertisement
English version
Introduction
First of all, many thanks for purchasing this Sweex 2.1 Subwoofer System 175 Watt. This speaker set enables you to enjoy high-quality sound and
the most realistic effects during films and/or games.
To ensure this product operates correctly, we advise you to carefully read this manual first. If despite this manual you still experience problems during
installation or operation of this product, go to www.sweex.com and look under the heading service & support.
In order to fully enjoy the Sweex 2.1 Subwoofer System 175 Watt, it is important to observe a number of things:
Do not expose the Sweex 2.1 Subwoofer System 175 Watt to extreme temperatures. Do not place the speaker set in the direct vicinity of heating
elements.
Do not use the Sweex 2.1 Subwoofer System 175 Watt in extremely dusty or moist surroundings.
Protect the speaker set against powerful shocks or jolts – they may damage the internal electronics and/or the speakers itself.
Never attempt to open the speaker set yourself – it will cause the warranty to lapse.
Contents of the box
Prior to using the Sweex 2.1 Subwoofer System 175 Watt, check if all required parts are present. The following parts must be present in the box:
• 2.1 Subwoofer System 175 Watt:
o 1 x Subwoofer
o 2 x Satellite speaker
• Audio cable (3.5 mm to 2 x plug)
• CD-ROM with manual
If one of the above parts is missing, please contact the retail outlet where you purchased the device.
SP002V2/SP002UKV2 Sweex 2.1 Subwoofer System 175 Watt
Advertisement
Table of Contents
Related Manuals for SWEEX SP002V2 - QUICK_START_GUIDE
Summary of Contents for SWEEX SP002V2 - QUICK_START_GUIDE
- Page 1 Never attempt to open the speaker set yourself – it will cause the warranty to lapse. Contents of the box Prior to using the Sweex 2.1 Subwoofer System 175 Watt, check if all required parts are present. The following parts must be present in the box: • 2.1 Subwoofer System 175 Watt:...
- Page 2 Installation of hardware First connect the satellite speakers to the woofer. Please note that these need to be connected to the ‘OUTPUT’ of the woofer. The red connection (R) is for the right speaker, the white connection (L) is for the left speaker.
- Page 3 Subsequently, the woofer must be connected to the sound source. Once again, note the colour coding of both the audio cable and the woofer. To this end, use the ‘INPUT’ connection of the woofer. The red connection (R) is for the red plug, the white connection (L) is for the white plug. The 3.5 mm audio plug can be connected to the sound card or any other sound source with a 3.5 mm output connection.
Need help?
Do you have a question about the SP002V2 - QUICK_START_GUIDE and is the answer not in the manual?
Questions and answers