Download Print this page

Anita's House Poppy Playpen Assembly Instructions

Download this manual

Poppy Playpen Assembly Instructions

We are delighted that you have chosen the Poppy Playpen and we know that you and your baby will love it! We are

obsessed with safety at Anita's House and it's good to know that the instructions supplied with the playpen have

passed stringent safety standards, so do make sure you follow them carefully to ensure that your playpen is

assembled correctly and is safe to use.

Please note: This instruction sheet has been created as a full-colour guide to accompany the original instructions

supplied by the manufacturer and is not intended as a replacement. Please check that you have read and followed

the original instructions carefully.

An adult should assemble this playpen and it is so much easier with two people. The playpen has 3 base heights

available*. The lowest base height is the safest and should always be used in that position once the baby is old

enough to stand. Just repeat steps 6 + 7 to adjust the base height as required.

of the end frame, which indicates the maximum height of the mattress when the base is at its highest.

IMPORTANT: All assembly fittings should always be tightened properly and care should be taken that no screws

are loose.

Should you need any help at all, just call our team on +44 (0)207 371 5145 and we'll be happy to help.

First, check you have everything you need:

A - End frame

D - Long silver housing

G - Cylindrical insert

Now follow the assembly instructions overleaf...

Anita's House, Unit 15, 2 Chelsea Wharf, London SW1O 0QJ, +44 (0)207 371 5145

B - Side frame

E - Allen key

H - Bolt 6x30

There is a cut mark on the inside

C - Base

F - Silver conical screws

I - Flag bolt

Need help?

Do you have a question about the Poppy Playpen and is the answer not in the manual?

Page 1 Poppy Playpen Assembly Instructions We are delighted that you have chosen the Poppy Playpen and we know that you and your baby will love it! We are obsessed with safety at Anita's House and it's good to know that the instructions supplied with the playpen have passed stringent safety standards, so do make sure you follow them carefully to ensure that your playpen is assembled correctly and is safe to use.
Page 2 Place the Long Silver Housings (D) into the holes at the corners of the end frame (A). Ensure that the hole in the silver housing (D) is facing downwards. D - Long silver housing A - End frame Hole in end frame Place the Cylindrical Inserts (G) into the side frames (B).