Summary of Contents for Delta Children Jeep WRANGLER CLASSIC WAGON
Page 1
WRANGLER CLASSIC WAGON INSTRUCTION MANUAL ADULT ASSEMBLY REQUIRED STYLES AND COLORS MAY VARY 65001 WARNING: CHOKING HAZARD Adult assembly required because of small parts. Keep assembly parts out of reach of children under 3 years. Read all instructions BEFORE assembly and USE of product KEEP INSTRUCTIONS FOR FUTURE USE.
Page 2
• Continuous adult supervision is required. • Never use near motor vehicles, streets roadways, alleys, swimming pool areas, hills, steps, sloped driveways, inclines and public highways. • No more than 2 riders at a time • Passengers should remain seated •...
LIMITED MANUFACTURER WARRANTY This Delta product is warranted to be free from defects for a period of 90 days from the date of purchase under normal use. This warranty extends only to the original retail purchaser and is valid only when supplied with proof of purchase, or if received as a gift, when the registration is on file with Delta.
Page 4
PARTS IMPORTANT! Please remove all parts from the package and identify them before assembly. IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if any parts are missing or broken. Contact manufacturer for replacement parts and instructions if needed. Never substitute parts.
Page 5
ASSEMBLY BACK Fig. 1B Fig. 1A Fig. 1 FRONT PREPARING WAGON • Lay out the Wagon body upside and indentify the front and back. • Front has 2 sets of 4 holes (Fig. 1A). • Back has one large set of 4 holes (Fig. 1B) What’s needed Long bolts M6x25mm...
Page 6
ASSEMBLY Fig. 3 Fig. 3A ATTACHING THE REAR WHEEL ASSEMBLY • Turn the wagon body as shown above and align the 4 holes on the rear necessary to support the backs of the bolts with your other hand while wheel assembly with the 4 bolts just placed in the wagon body. (Fig. 3) doing this.
Page 7
ASSEMBLY Fig. 5A Fig. 5C Fig. 5 Fig. 5D Fig. 5B FRONT WHEEL SWIVEL LOCK ATTACHING REAR WHEELS • Attach nut to axle. (Fig. 5B) • With the rear wheel assembly firmly in place, place one of the wheels • Tighten nut with included wrench (Fig. 5C) onto the axle (Fig.
SETUP AND USE FRONT WHEEL ASSEMBLY Fig. 7C Fig. 7A Fig. 7B Fig. 7 ADJUSTING HANDLEBARS • Pick up the Front wheel assembly and locate the opening in the bar connecting the two wheel hubs (Fig. 7). • With the Handle screw still in the handle attachment assmbley, place screw through opening infront wheel assembly. (Fig. 7A). •...
Page 9
SETUP AND USE Fig. 9 Fig. 9B Fig. 9C Fig. 9A CONNECTING FRONT WHEEL ASSEMBLY TO FRONT CONNECTION HUB • Locate the Front Connection Plate as shown in (Fig. 9). shown in Fig. 9C. • Align Front Connection Plate to Front Wheel Assembly as shown in •...
Page 10
SETUP AND USE What’s needed Short bolts M6x15mm (x8) Fig. 11D Fig. 11A Fig. 11 Fig. 11C Fig. 11E Fig. 11B INSTALLING FRONT WHEEL ASSEMBLY TO WAGON BODY • Turn the wagon body as shown above and locate the 8 holes at the neccessary to support the backs of the bolts with your other hand while front end of the wagon.
FOLDING THE HANDLE Fig. 1 Fig. 1B Fig. 1A Operating and folding the wagon handle. • In the upright position the wagon handle will naturally stay in place. (Fig • The handle can swing freely for use and storage (Fig 1A) •...
Need help?
Do you have a question about the Jeep WRANGLER CLASSIC WAGON and is the answer not in the manual?
Questions and answers