Advertisement
Thank you for purchasing the only expandable tonneau cover on the market. Sawtooth proudly manufactures the Sawtooth
STRETCH and takes great care to provide you a premium product that does what no other tonneau can. With proper installation
and care, your new cover should provide years of reliable service.
NOTICE: It is recommended that you read and follow the installation, maintenance, and safety instructions prior to installation and
use of this product. Failure to follow these instructions will result in product failure and will void the Sawtooth warranty. Save these
instructions for future reference.
with care to avoid damage.
Your new Sawtooth STRETCH tonneau must be registered to make the warranty valid. Registration information can be found on the
back page.
Sawtooth offers a limited lifetime warranty against defective materials or workmanship on all aluminum and plastic components.
Sawtooth offers a limited one-year warranty on the textile and rubber components. This warranty is void if the product has been
damaged by accident, unreasonable use, neglect, improper service, or installation. Any modification, acts of God, normal wear and
tear or other causes not arising from defective materials or workmanship is not considered under this warranty. The following are
examples of conditions that will void the warranty:
Punctures that form because of covering sharp or pointy objects.
Overloading the tonneau on extremely large cargo.
Improper cleaning of the cover using harsh chemicals. Do not use chemicals like Amor All. Do not use chemicals designed
to be used on traditional vinyl tonneaus.
Improper maintenance of the cover.
Sawtooth reserves the right to determine if all warranty conditions have been met. Upon determination, Sawtooth may require the
product to be returned postage prepaid to further inspect the warranty claim. Given that all conditions are met Sawtooth will either
repair or replace (at Sawtooth's determination) the product or the component. In the event a product must be returned, a Return
Authorization # must be obtained through our customer service and must be on the written on the parcel for it to be accepted. This
warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.
Page 1 of 8
STRETCH EXPANDABLE TONNEAU COVER
INSTALLATION & MAINTENANCE INSTRUCTIONS
THANK YOU
Often improvements are made without prior notice. Always handle the cover and components
WARRANTY
Rev. 2024-07-08
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for SAWTOOTH STRETCH
- Page 1 Thank you for purchasing the only expandable tonneau cover on the market. Sawtooth proudly manufactures the Sawtooth STRETCH and takes great care to provide you a premium product that does what no other tonneau can. With proper installation and care, your new cover should provide years of reliable service.
- Page 2 Considerable trim cutting is required with an over-the-rail drop in bed liners. COMPONENTS Cab Rail and attached Stretch Cover Side Rails (2) (Side Rails have Plastic Bow Receivers) ...
-
Page 3: Installation
2. Place Cab Rail with attached Stretch Cover in Pickup Truck Bed Box on Bed Rail next to Pickup Truck Cab. The Cab Rail and cover should nest in and sit between the two side bed rails. - Page 4 Allen Key Tightening 6. Using two hands, slowly pull and hook the Stretch cover corner “J”-Hook over the corner Rails. Be sure to pull on the stretch textile and not the rubber J-hook. Failure to install the corners first will damage the J-hook.
-
Page 5: Operation
STRETCH EXPANDABLE TONNEAU COVER 8. Place Bow ends into Bow Receivers. First, place the spring compression end into the Bow Receiver. Then place the non-spring compression end into the Bow Receiver. 9. Pull the “J”-Hook towards you with one hand and push the “J”- Hook over and hooking it to the Rail with other hand while moving down the perimeter. - Page 6 (CAUTION: Not removing bows first and trying to roll the cover up will result in damage to the sleeves pulling away from the cover.) 4. Roll Stretch cover towards Cab and secure using attached buckles. 5. Pull Tailgate Rail towards you releasing.
- Page 7 TIPS It is best to initially install a SAWTOOTH STRETCH on a warm sunny day. In cold weather, materials may resist stretching. Proceed slowly when stretching fabric and J-Hook. After initial installation, allow textile and J-Hook to acclimate for 3-5 days before stretching over cargo load.
-
Page 8: Care And Maintenance
This limited warranty gives you specific legal rights and you may have other rights, which vary, from state to state. You can view Sawtooth’s warranty and return policy at https://sawtootht.com/pages/warranty-and-returns. Your new Sawtooth tonneau must be registered to make the warranty valid. You can register your unit online at https://sawtootht.com/pages/sawtooth-warranty-registration.
Need help?
Do you have a question about the STRETCH and is the answer not in the manual?
Questions and answers