Download Print this page
Philips dynalite DMP116 Installation Instructions

Philips dynalite DMP116 Installation Instructions

Phase cut dimming module

Advertisement

Quick Links

DMP116
Phase Cut
Dimming Module
Devices must be installed by a
qualified electrician in accordance with
all national and local electrical and
construction codes and regulations.
Les appareils doivent être installés par un
électricien diplômé conformément à tous les codes
et réglementations électriques et de construction
nationaux et locaux.
Die Geräte sind von einem qualifizierten Elektriker
in Übereinstimmung mit allen geltenden
Vorschriften zu installieren.
1
A
B
C
IEC Pollution Degree II
Los dispositivos deben ser instalados por un
electricista calificado y cumpliendo todas las
normas y regulaciones, tanto nacionales como
locales, sobre instalaciones eléctricas y obras.
I dispositivi devono essere installati da un
elettricista qualificato in conformità con le norme
locali e nazionali vigenti in materia di costruzioni
edilizie e installazione di impianti elettrici.
De apparaten moeten worden aangebracht
door een gekwalificeerde elektricien en in
overeenstemming met alle nationale en
plaatselijke elektriciteits- en bouwvoorschriften.
Channel 1:
Channel 2:
Channel 3:
DMC2/
DMC4
≤90%
40° C (122° F)
0° C (32° F)
Installation Instructions
Instructions d'installation
Installationsanweisungen
Instrucciones de instalación
Istruzioni per l'installazione
Installatie-instructies
インストール手順
安装指南
装置を取り付ける際は、 資格のある電気技師に依頼し、
国および地域の電気および建設に関するすべての法令に
従ってください。
根据国家/地区及当地的电气与建筑规范和法规,该设
备必须由有资质的电工进行安装。
.
302 mm (11.89 in)

Advertisement

loading
Need help?

Need help?

Do you have a question about the dynalite DMP116 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Philips dynalite DMP116

  • Page 1 Installation Instructions Instructions d’installation Installationsanweisungen Instrucciones de instalación DMP116 Istruzioni per l’installazione Installatie-instructies インストール手順 Phase Cut 安装指南 Dimming Module Devices must be installed by a Los dispositivos deben ser instalados por un 装置を取り付ける際は、 資格のある電気技師に依頼し、 国および地域の電気および建設に関するすべての法令に electricista calificado y cumpliendo todas las qualified electrician in accordance with 従ってください。...
  • Page 2 1 Nm 8.8 Lb-in DMC2 DMC4 IEC Pollution Degree II Refer to circuit breaker for torque rating...
  • Page 3 Refer to circuit breaker for torque rating Output Ratings/Channel (CH) Load Type 120 V 240 V 277 V Operating mode* Incandescent 16 A 16 A 10 A Leading Edge / Trailing Edge Magnetic with Halogen 16 A 16 A 10 A Leading Edge Electronic Driver 16 A...
  • Page 4 No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield www.dynalite.com Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.