Page 1
Connect the photo key chain to a USB port of your computer. Press the menu button on the rear side of the photo key chain and choose “USB Connect”. Select “Yes” and wait 15 seconds. The software will start automatically.
Page 2
With the “Up” and “Down” buttons you can browse through the photo's and navigate in the menu. Press “Menu” on the rear side to enter the menu and change the settings. To select one of the menu items press menu again. Change the values with the “Up” and “Down”...
Need help?
Do you have a question about the MM004PV3 and is the answer not in the manual?
Questions and answers