Summary of Contents for Technoflux SC-4
- Page 1 Ref. PUL3M0130 Ver.02 User manual: Centrifugal Dryer SC-4 BRAND: Technoflux DIMENSIONS: 470 x 400 x 580 mm WEIGHT: 42 kg VOLTAGE: 230V / 50 Hz...
- Page 2 We thank you very much for purchasing...
- Page 3 Índice 1. INTRODUCTION 2. WARRANTY 3. TECHNICAL SPECIFICATIONS 3.1 Machine specifications 3.2 General recommendations 4. MACHINE STRUCTURE 4.1 Machine parts 4.2 Safety labeling 4.3 Control panel 4.4 Instructions for timer TA-013S 5. TRANSPORTATION 6. INSTALLATION 7. STARTING THE MACHINE 7.1 Operating principle 7.2 Boot cycle 7.3 Notes and comments 8.
-
Page 4: Warranty
These notes provide the information necessary for the correct installation, use and maintenance of the purchased machine. 2. Warranty TECHNOFLUX products are covered by a twelve-month warranty. From the date of delivery to the customer. 3. Technical specifications 3.1 Machine specifications... -
Page 5: General Recommendations
3.2 General recommendations • The SC-4 centrifugal dryer is designed to collect moisture from surfaces such as jewelry, sheet metal patterns, castings, semi-finished products, etc. • Especially recommended for drying the final product, but also for intermediate drying. Centrifu- gal dryers offer simple, quiet and reliable operation. - Page 6 4.2 Safety Labeling Signal Meaning ATTENTION: Hot surface 4.3 Control Panel 1. Timer 2. Speed regulation 3. Main switch 4. Temperature regulation [°C] 5. START/STOP button After placing the parts in the drying basket, turn the main switch to the “ON” position (#3) and then, depending on the characteristics, select temperature and speed (#2 and 5).
- Page 7 4.4 Instructions for timer TA-040 After connecting the machine to the mains, the rest of the process will appear on the main screen (7) and the newly implemented program number on the screen (1). The watch allows you to save a memory with 10 different times.
-
Page 8: Starting The Machine
5. Transport The SC-4 centrifugal dryer can be transported in an upright position. It must be properly protec- ted during transport and, in the case of open transport, the centrifugal dryer must be protected from rain. It can be transported by a minimum of two people by hand or by car. -
Page 9: Technical Inspection
Conditions 10.1 Introduction Work on the evaluation of the Technoflux SC-4 centrifugal dryer with regard to industrial safety has been carried out to approve the EC Declaration of Conformity with Directive 2006/42/WE, as well as with the harmonized standards of Poland in matters of industrial safety. - Page 10 10.2 Legal base The evaluation of the machine will be established based on the requirements of the following provi- sions: • European Parliament and European Council 2006/42/WE of May 17, 2006: laws of the Member States on machinery. • European Parliament and Directive Council 2004/108/WE of December 15, 2004: the laws of the Member States related to electromagnetic compatibility.
- Page 11 • PN-EN ISO 4413:2011 Hydraulic drives and controls: General principles and safety require- ments for systems and their components. 10.3 Risk Description The following harmful and dangerous agents that occur in work related to the operation of the machine can cause accidents and health risks. •...
- Page 12 Benmayor S.A. A-60512100 Bach, 2-B. Pol. Ind. Foinvasa 08110 Montcada i Reixac, Barcelona benmayor@benmayor.com T +34 935 724 161 / F +34 935 724 165 benmayor.com...
Need help?
Do you have a question about the SC-4 and is the answer not in the manual?
Questions and answers