Do you have a question about the HX-DR01 and is the answer not in the manual?
Questions and answers
Summary of Contents for DROPLUX HX-DR01
Page 1
www.fervicom.com DMX512 RDM Decoder DR01 is the most advanced decoder with both DMX/RDM capable, PWM frequency / gamma curve are adjustable, the output can be set to 4 types with a total of 9 different attributes; suitable for all kinds of constant voltage LED lamps, such as Single color/CCT/RGB/RGBW LED module, LED strip, light string and so on.
Page 2
www.fervicom.com 4. With power-off memory storage function, it will remember the settings saved in the last power down; 5. 4 in 1 output types, support single color/CCT/RGB/RGBW; 6. 9 different DMX512 decoding profiles are available, from CH01 to CH09; 7. PWM frequency is adjustable: 500Hz, 1KHz, 2KHz, 4KHz, 7.8KHz, 15.6KHz; 8.
Page 3
www.fervicom.com Wiring Details of LED OUTPUT CH01 CH02 CH03 connection) CH04 CH05 CH06 CH07 CH08 CH09 LED1- LED2- LED3- LED4- Tips, factory default is RGBW, CH04. DR01 is controlled by the DMX signal system. At the same time, a built-in test function can be used to illuminate the LED load without a DMX signal during the installation process, and press the "MODE"...
Page 4
www.fervicom.com 1.Single press the MODE button to switch: 1) “Dxxx”: DMX start address setting, D001-D512; 2) “PLxx”: test modes setting, PL01-PLFL; 3) “SPxx”: the speed of test modes setting, SP01-SP99. 2. Long pressing the MODE and SAVE buttons for 3 seconds to enter the advanced settings;...
Page 5
www.fervicom.com CH1+CH CW fade WW fade WW fade CW+WW CH08 fade CH1 fade Non- CH1-CH4 CH09 Non-used Non-used Non-used used fade Note: The test mode list is determined by the DMX decoding type set. Press the "MODE" key, when the digital tube displays SPxx (xx is 01-99), enter the test mode speed adjustment.
Page 7
www.fervicom.com 500Hz 1KHz 2KHz 4KHz 7.8KHz 15.6KHz Please press SAVE to save the setting operation, the digital tube will display "SAVE" and automatically exit the setting state after 1 second. Press "MODE" key, when the digital tube displays gAxx. Enter the gamma curve selection. Select the desired gamma curve by pressing the UP / DOWN keys.
Page 8
www.fervicom.com Please press SAVE to save the setting operation, the digital tube will display "SAVE" and automatically exit the setting state after 1 second. Press the "MODE" key, when the digital tube displays rst0, enter the factory reset. By pressing the UP / DOWN key and pressing the "SAVE" key when the digital tube displays rst1, the decoder enters the factory reset.
Page 9
5. This product has short-circuit protection function, but it should not be overloaded; 6. The warranty period of this product is 3 years, exclude man-made damage or the form of overload work. Product information for placing order HX-DR01 HX-DR02 HX-DR03 Fervicom SAS www.fervicom.com...
Need help?
Do you have a question about the HX-DR01 and is the answer not in the manual?
Questions and answers