Sunnydaze GSI-806 Manual

FREESTANDING FLOOR FOUNTAIN
Review all assembly and care information before using this product. Save this manual for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
No.
A Fountain Body
B Basin
C Electric Submersible Pump
D Decorative Stones
Tools Required
IMPORTANT NOTES: Use care when unpacking and assembling this
fountain. Check the basin for leaks before assembling the fountain. The sealant used
to join the slate pieces can become cracked if the fountain is not handled with care.
Simply add water and wait to see if water begins to leak. If a leak is discovered,
contact an expert at your local hardware store for an appropriate sealant and carefully
follow sealant manufacturer's instructions to seal the leak.
The water tubing is built into the decorative top. Take care when handling the water
tube; detaching the water tube from the decorative top will damage the fountain and
void the product warranty.
Slate is a natural product; the colors and texture of each piece are unique, no two
fountains will look the same. Variations in the slate colors and textures are not a cause
for return. Each fountain is cut from large slabs of slate. Spalling (flaking) may occur
naturally over time, and/or if slate is dropped.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS CAUSED BY
THE APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS, OR SEALANTS.
ASSEMBLY
1. Remove the bolts and washers from Basin (B).
2. Connect Electric Submersible Pump (C) to Fountain Body (A).
3. Gently place the fountain body onto the basin, ensuring the pump power cord runs out the groove in the
back of the basin.
4. Secure the fountain body to the basin using the washers and bolts that were removed during Step 1.
5. Rinse Decorative Stones (D) with clean water. Gently arrange stones on the bottom of the fountain body.
6. Fill the basin with enough water to keep the pump fully submerged during operation, approximately 3 gallons.
7. Plug the power cord into a properly grounded GFCI outlet.
NOTE: When first plugged in, there may be air trapped in the pump. It may take several moments for trapped air to escape, allowing water to flow.
SPQ1345
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
STACKED SLATE
Select a smooth, level surface to place the fountain.
2-PERSON
ASSEMBLY
RECOMMENDED
Parts
(not included)
Phillips Screwdriver
/ / Order/Customer Reference Number:
GSI-806
Qty.
A
1
1
1
1
PK
C
B
11/2023
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
D
Page 1 / 2