Dvd Connection; Dtv Connection - Haier P42S6A-C2 Owner's Manual

External Equipment Connections

DVD connection

How to connect
1
. Connect the DVD video outputs (Y,
Pb/Cb, Pr/Cr) to the YUV IN jacks on the TV
and connect the DVD audio outputs to the
AUDIO IN jacks on the TV, as shown in the
figure.
2
. If your DVD only has an SCART output
jack, connect this to the SCART input on
the TV. as shown in the figure.
NOTE: If your DVD player does not have
component video output, use S-Video.
How to use
1
. Turn on the DVD player, insert a DVD.
2
. Use the TV/AV and VOL+/- button on the
remote control to select SCART mode.
3
.
Press Play button on external equipment
for program play.
4
. Refer to the DVD player's manual for
operating instructions.
VGA IN
VGA AUDIO Pr/Cr
or
RGB-DTV OUTPUT R AUDEO L HDMI/DVI OUTPUT
Digital Set-top Box
COMPONENT IN DVI IN
HDMI/DVI VIDEO
Pb/Cb Y L-AUDIO-R
or
R AUDEO L
Y Pb
COMPONENT IN
Pr/Cr Pb/Cb Y

DTV connection

-To watch digitally broadcast programs,
purchase and connect a digital set-top box.
How to connect
Use the TV`s YPbPr IN and AUDIO IN jacks,
VGA or HDMI/DVI VIDEO port for video
AUDIO
connections, depending on your set-top
box connections available. Then, make the
corresponding audio connections.
How to use
1
. Turn on the digital set-top box. (Refer to
the owner`s manual for the digital set-top
box.)
2
. Use TV/AV on the remote control to
select DVI
3
.
Press Play button on external equipment
for program play.
Pr R AUDEO
SCART2 SCART1
L-AUDIO-R
or
DVD
mode.
ANT IN