Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dirty Hand Tools 101099
Summary of Contents for Dirty Hand Tools 101099
- Page 1 1-1/2” DIAMETER WATER PUMP 2.2HP/79.8cc Engine MODEL # 101099 Operation Manual This safety alert symbol identifies important safety messages in this manual. Failure to follow this important safety information may result in serious injury or death. Part # 101379 Rev C...
- Page 2 For Service or Questions Call 1-877-487-8275 720-287-5182 www.dirtyhandtools.com Dirty Hand Tools® is a brand of 1100 W 120th Ave, Suite 600 Westminster, CO 80234 • 720-287-5182...
-
Page 3: Table Of Contents
Table of Contents Important Safety Information .............4 Unpacking and Setup ..............7 Filling with Gasoline and Oil ............8 Operation Precautions ..............9 Hose Connection .................10 Water Pump Location & Setup ...........11 Operation ..................12 Maintenance .................14 Troubleshooting ................17 Storage ..................19 Warranty and Specifications .......... Back Cover... -
Page 4: Important Safety Information
Important Safety Information WARNING WARNING: Read and thoroughly understand all instructions and safety information before operating this portable water pump. Failure to do so may cause serious injury or death. Do not allow anyone to operate this portable water pump who has not read this manual. - Page 5 Important Safety Information General Safety Failure to follow warnings, cautions, assembly and operation instructions in the Operation Manual may result in serious injury or death. DANGER READ THE OPERATION MANUAL BEFORE OPERATION. • Do not permit children to operate this equipment at any time. Do not permit others that have not read and understood the complete Operation Manual to operate this equipment.
- Page 6 Make sure all safety warning decals are attached and in readable condition. Replace missing or defaced decals. Contact Dirty Hand Tools at 1-877-487-8275 for replacement decals. DANGER USING AN ENGINE INDOORS...
-
Page 7: Unpacking And Setup
Unpacking and Setup Your portable water pump is completely assembled at the factory. Save the packing materials and box for future use as a storage container. Setup for use outside in a well ventilated area on a level, stable surface away from doors, windows, vents, etc. COMPLETELY READ AND UNDERSTAND THE OPERATOR’S MANUAL BEFORE ATTEMPTING TO OPERATE THE WATER PUMP. -
Page 8: Filling With Gasoline And Oil
Filling with Gasoline and Oil To prevent serious injury and fire: WARNING 1. Do not add fuel while the engine FUEL IS HIGHLY FLAMMABLE AND POISONOUS is hot or running. 2. Do not smoke while filling with fuel. ALWAYS FILL THE TANK WITH 3. -
Page 9: Operation Precautions
Operation Precautions DANGER CARBON MONOXIDE HAZARD USING AN ENGINE INDOORS CAN KILL YOU IN MINUTES. Engine exhaust contains carbon monoxide. This is a poison you cannot see or smell. 1. Keep all safety guards in place and in proper working order at all times, including covers for the air cleaner and muffler. -
Page 10: Hose Connection
Hose Connection CAUTION USE ONLY A NON-COLLAPSIBLE INTAKE HOSE DO NOT OVER TIGHTEN HOSE CLAMPS The suction hose must be reinforced or be constructed of non-collapsible material. Do not use a hose with an inside diameter smaller than the pump’s intake and discharge ports. 1. -
Page 11: Water Pump Location & Setup
Water Pump Location & Setup Locate the water pump on a flat, level, sturdy surface capable of supporting the weight of the pump. 1. For best results place the pump near water level and use hoses that are no longer than necessary. This allows the pump to produce the greatest output with the least self-priming time. -
Page 12: Operation
Operation CLEAN WATER CAUTION Always check for water in the pump housing before each use. Always run the pump with the pump housing full of water. Running the water pump without water for an extended period PRIMING of time will damage the water pump and void the warranty. Priming the Pump Before starting the engine, fill the pump with water. - Page 13 Operation Starting the Engine 1. To start a cold engine, move the choke to the CHOKE CHOKE position (to the left). To restart a warm engine, leave the Choke in the RUN position (to the right). 2. Open the fuel valve by sliding switch to the right. 3.
-
Page 14: Maintenance
Maintenance WARNING BEFORE PERFORMING ANY MAINTENANCE PROCEDURE STOP THE ENGINE, WAIT FIVE (5) MINUTES TO ALLOW ALL PARTS TO COOL. Turn the engine switch to the OFF position. Regular maintenance is the way to ensure the best performance and long life of your machine. Please refer to this manual and the engine manufacturer’s owner’s manual for maintenance procedures. - Page 15 Maintenance AIR FILTER WARNING RETAINING TO PREVENT SERIOUS INJURY FROM KNOBS ACCIDENTAL STARTING TURN THE POWER SWITCH OF THE ENGINE TO ITS “OFF” POSITION. Wait for the engine to cool, and remove the spark plug wire before performing any inspection, maintenance, or cleaning procedures.
- Page 16 Maintenance WARNING OIL IS VERY HOT DURING OPERATION AND CAN CAUSE BURNS. WAIT FOR ENGINE TO COOL BEFORE CHANGING OIL. Wait for the engine to cool, and remove the spark plug wire before performing any inspection, maintenance, or cleaning procedures. Changing the engine oil SAE VISCOSITY GRADES 1.
-
Page 17: Troubleshooting
Engine Troubleshooting WARNING BEFORE PERFORMING ANY MAINTENANCE PROCEDURE STOP THE ENGINE, WAIT FIVE (5) MINUTES TO ALLOW ALL PARTS TO COOL. Disconnect the spark plug wire, keeping it away from the spark plug. PROBLEM SOLUTION The engine will not start. •... - Page 18 Water Pump Troubleshooting PROBLEM SOLUTION Pump overheats • Incorrect or not enough lubrication. • Lubricate using recommended oil or grease according to directions. • Worn parts. • Have qualified technician inspect internal mechanism and replace parts as needed. Unit stalls •...
-
Page 19: Storage
Storage WARNING Drain the fuel tank in a well-ventilated area MUFFLER away from ignition sources. If the engine is hot from use, shut the engine off and wait SPARK for it to cool before draining fuel. PLUG Do not smoke near the fuel tank. WIRE AIR FILTER 1. -
Page 20: Warranty And Specifications
19.5”L x 14.4”W x 17.8”H Weight 43 Lbs. Accessories 1-1/2” Hose Kit *As rated by engine manufacturer For Service or Questions Dirty Hand Tools® is a brand of Call 1-877-487-8275 720-287-5182 1100 W 120th Ave., Suite 600 www.dirtyhandtools.com Westminster, CO 80234 • 720-287-5182...
Need help?
Do you have a question about the 101099 and is the answer not in the manual?
Questions and answers