1. GENERAL INFORMATION 1.1 Information about the user manual 1.2 Key to symbols 1.3 Liability and Warrantees 2. SAFETY 2.1 General information 2.2 Safety instructions for the commercial use of the device 2.3 Intended use 3. INSTALLATION AND OPERATION 3.1 Safety instructions 3.2 Assembly and set-up 3.3 Operation 3.4 Notices for the user...
Page 3
1. GENERAL INFORMATION 1.1 Information about the user manual This user manual contains information about the installation, operation, and maintenance of the device and should be referred to as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
Page 4
NOTE! Read the instruction manual carefully before using the device. The manufacturer does not accept liability for any damage or malfunction resulting from not following the instructions for use. The instruction manual should be kept near the device, easily accessible for anyone wishing to use it.
Page 5
13. Always switch off and disconnect the power supply before cleaning. 14. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 15. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Page 6
3.2 Installation and Connection ATTENTION! Connection and Installation of the device may be performed by qualified personnel only. Unpack individual parts of the equipment. Remove the protective foil. The appliance must be located in a safe place and on an even surface which can bear the weight of the device.
Page 7
To prevent loss of refrigeration, only open the doors briefly to prevent loss of cooling energy. Also, do not open doors too frequently. In case of a sudden power loss, do not open the doors to prevent loss of cooling air. After loss of power or pulling the mains plug, do not reconnect the device to the power supply for at least 5 minutes.
4. TEMPERATURE CONTROLLER This product uses temperature controller. If you want to know more information and details about it, please refer to the instruction manual of this controller placed together with this manual, or contact its manufacturer directly. 5. CLEANING AND MAINTENANCE 5.1 Safety Advice Before repairing or cleaning the device, make sure it has been disconnected from power socket (pull the power plug!!!) and has cooled down.
In case of damage or malfunction, please contact our customer service. Only a qualified technician, using original spare parts and accessories, should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself. 5.4 Maintenance In order to maintain the efficiency of the cooling unit for a long time, the following maintenance operations must be carried out regularly for the condenser: Disconnect the device from the outlet socket (remove the plug!)
Page 10
8. COMPLIANCE All parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorizes. Products have been approved to carry the following symbols:...
Need help?
Do you have a question about the SK47 and is the answer not in the manual?
Questions and answers