Advertisement
Quick Links
(1) ProFlag
BASE / STAKE ASSEMBLY
FOLDING BASE
Open and set base on ground at desired
location. Place the flag pole onto Folding Base.
GROUND STAKE
Hammer stake into ground. Place the flag pole
onto the Ground Stake.
POLE ASSEMBLY
Remove pole segments from the carry bag.
Step 1.
Assemble the flag pole, starting with the base pole. Connect smaller diameter sections with each other.
Step 2.
Verify that all sections are completely connected to ensure a proper flag fit.
Step 3.
PROFLAG
INSTRUCTION SHEET
(1) ProFlag
Composite Pole Set with Carry Bag,
TM
Flag Fabric and Your Choice of Base or Ground Stake
TM
TM
DELUXE CROSS BASE
Align the two bars in an X shape, the
grooved bar goes on the bottom.
Align the metal base in the center and
tighten the nut underneath.
Place the flag pole onto Deluxe Cross Base.
DELUXE GROUND STAKE
Hammer stake into ground. Place flag pole
onto Deluxe Ground Stake.
Advertisement
Related Manuals for Ezup PROFLAG
Summary of Contents for Ezup PROFLAG
- Page 1 PROFLAG INSTRUCTION SHEET (1) ProFlag Composite Pole Set with Carry Bag, (1) ProFlag Flag Fabric and Your Choice of Base or Ground Stake BASE / STAKE ASSEMBLY FOLDING BASE DELUXE CROSS BASE Open and set base on ground at desired Align the two bars in an X shape, the location. Place the flag pole onto Folding Base. grooved bar goes on the bottom. Align the metal base in the center and tighten the nut underneath. Place the flag pole onto Deluxe Cross Base. GROUND STAKE DELUXE GROUND STAKE Hammer stake into ground. Place the flag pole Hammer stake into ground. Place flag pole onto the Ground Stake. onto Deluxe Ground Stake. POLE ASSEMBLY Remove pole segments from the carry bag.
- Page 2 Step 2. proper flag fit on pole. Working the fabric down slowly makes it easier to slip flag fabric completely through. Insert the right-angle pole into the top of the flag fabric pocket. Note: You will be using this pole instead of the thinnest pole. Step 3. Join the two poles by inserting the angled portion of the arm assembly pole into the top of the flag pole. Step 4. (Smaller diameter sections insert into one another.) Pull the fabric taut. Attach rope to flag tension adjuster. Step 5. Adjust the flag to the desired tension. Do not over-tighten the bolt. Step 6. CARE AND MAINTENANCE For long lasting durability and the best possible protection for your E-Z UP® ProFlag , follow these E-Z care and maintenance instructions: • Use a mild soap (not detergent) and plenty of water for the cleaning. • Let the product dry completely before closing or storing to avoid mildew. REPLACEMENT PARTS WARRANTY INFORMATION 800-45-SHADE ezup.com/parts www.ezup.com/warranties CONDITIONS This warranty shall be void as to any product that has been altered or modified in any manner. This warranty does not apply to damages caused by wind, rain, or other forces of nature, not to accidental or deliberate damage of the product, nor to the use of the product that does not conform with the product instructions. This warranty is provided in lieu of all other warranties, expressed or implied. WARNING: Do not set up within 30 feet of power lines. Do not use during electrical storms or high winds. Keep all flame and heat sources away from fabrics and accessories. These fabrics meet the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any...
Need help?
Do you have a question about the PROFLAG and is the answer not in the manual?
Questions and answers