Advertisement
Quick Links
MOUNTAIN ALARM
DIV. OF J.D DAVIS COMPANY, INC.
Congratulations on you new alarm detection system. The system is very simple to operate.
Mountain Alarm has tried to anticipate some of your questions. The following operating instructions will
help you familiarize yourself with the XL 4500 System.
1.
2.
3.
A. KEYPAD OPERATION:
1. ZONE LIGHTS (ZONES 1-5
Zone Normal ------------------------------------ Light Off
Zone Open -------------------------------------- Light On
Zone Bypassed -------------------------------- Slow Blink
Zone Alarm ------------------------------------- Fast Blink
2. STATUS LIGHTS
RDY -------------------------------------- ON- System Ready to be armed.
ARM (Red)------------------------------ ON- System is armed.
STAY ------------------------------------ ON- Interior zones are bypassed.
INST. ------------------------------------ ON- Entry doors are instant.
AC/LB ----------------------------------- ON- AC power is present.
NOTE: 1. A blinking "AC/LB" light & blinking keypad is a trouble signal and it
indicates low battery. To silence enter your code at the Keypad.
B. SYSTEM OPERATION:
1. ARMING THE SYSTEM (Leaving Home): 1. Enter your four digit code.
NOTE: 1. There is a time delay on the entry/exit doors (Zone-1).
2. You must leave within 60 seconds.
2. ARMING THE SYSTEM (Staying Home):--1. Press the "STAY" Key.
3. DISARMING THE SYSTEM: ----------------- 1. Enter your four digit code.
NOTE: 1. There is a time delay on the entry/exit doors (Zone-1).
2. There is a steady tone upon re-entering. It will not stop until the system is disarmed.
3. The system must be disarmed within 20 seconds, or the siren will come on.
4. TO MAKE ZONE-1 INSTANT: ---------------------------------1. Press "INSTANT" button.
1235 S. HURON STREET
DENVER, CO 80223
ZONE IDENTIFACATION
4.
5.
OFF- System not ready to be armed.
OFF- System is off.
OFF- Interior zones are normal.
OFF- Entry doors are delay.
OFF- AC power is off. (Operating on battery only)
2. Press "#" & 1 to quick arm OR
3. Press "#" & "2" to force arm.
--2. Enter your four digit code.
2. Press "STAY" button.
Advertisement
Related Manuals for MOUNTAIN ALARM XL 4500
Summary of Contents for MOUNTAIN ALARM XL 4500
- Page 1 DENVER, CO 80223 Congratulations on you new alarm detection system. The system is very simple to operate. Mountain Alarm has tried to anticipate some of your questions. The following operating instructions will help you familiarize yourself with the XL 4500 System.
- Page 2 3. Enter your four digit code. NOTE: Disarming automatically reactivates the time delay. 5. TO BYPASS ANY ZONE: -----------1. System must be disarmed. 2. Press “BYPASS” button. 3. Enter your four digit code. 4. Press the zone number of the zone to be bypassed. 5.
Need help?
Do you have a question about the XL 4500 and is the answer not in the manual?
Questions and answers