Download Print this page

MIPS SEAD-3 Getting Started Manual

Download this manual

Getting Started Guide for MIPS SEAD-3

Timesys

Contents

1 Introduction

2 Prerequisites

2.1 Host Requirements

timesys-linux-<libc>/images/

build_mipsisa32r2-

Need help?

Do you have a question about the SEAD-3 and is the answer not in the manual?

Page 1 Getting Started Guide for MIPS SEAD-3 Timesys Contents 1 Introduction 2 Prerequisites 2.1 Host Requirements build_mipsisa32r2- timesys-linux-<libc>/images/...
Page 2 3 Preparing the Target 2.2 Target Requirements 3 Preparing the Target 3.1 Conguring Serial Communication 3.1.1 Using Minicom 38400...
Page 3 3 Preparing the Target 3.1.2 Using GNU Screen 3.2 YAMON...
Page 4 4 Preparing the Host 3.3 Conguring the Network Interface 3.3.1 Finding and Changing the MAC Address setenv Example NOTE 3.3.2 Changing the IP Address bootserver 4 Preparing the Host 4.1 Setting up the network Identify the network adapter connecting the Host to the Target...
Page 5 4 Preparing the Host...
Page 6 4 Preparing the Host Installing the server daemons on the development host Important:...
Page 7: Setting Up Dhcp
4 Preparing the Host 4.2 Disable SELinux and Firewall on Fedora Core Generally Ubuntu does not have these services running by default. 4.3 Setting up DHCP...
Page 8 4 Preparing the Host 4.4 Setting up TFTP On Ubuntu On Fedora Core...
Page 9 4 Preparing the Host NOTE Ubuntu users will skip this step.
Page 10 5 Booting the Board 4.5 Setting up NFS 5 Booting the Board 5.1 Load The Kernel load load Example...
Page 11 6 Additional Information 5.2 Boot the Kernel Example 6 Additional Information 6.1 Changing Board Endianness 6.2 Changing Boot Serial Port...
Page 12 6 Additional Information 6.3 Factory Documentation...