Advertisement
Quick Links
Advertisement
Summary of Contents for MAXPEEDINGRODS JZ11EP
- Page 1 TRAILER HITCH RECEIVER INSTRUCTIONS...
- Page 2 PRODUCT INFORMATION This trailer hitch receiver is a bolt-on hitch that can be installed on your Jeep Gladiator without modification. KITS CONTENT 1 x 2" Hitch Receiver 1x Hexagonal Screw 2x Round Head Screws 3x Spacers 3x Spring Pads 2x Nuts 2x Square Hole Spacers 2x Fishing Wires INSTRUCTIONS...
- Page 3 Pull the coiled end of the fishing wire (8) through the bolt holes under- neath the rear crossmember and pull it towards the ends of the rear crossmember. Attach the coiled end of the fishing wire to the round head screw (3) passing through the square hole spacer (7) Pull the fishing wire back slowly so that the round head screw pulls into the bolt hole underneath the cross member.
- Page 4 THR-JEECLA3-LC...
Need help?
Do you have a question about the JZ11EP and is the answer not in the manual?
Questions and answers