VTech VS112A User Manual

VS112A 1 Connect and charge the battery
https://hkphones.vtech.com
VS112-2A
Note
• Use only the adaptors provided.
• Use only the battery supplied.
• Connect the power adaptors in a vertical or floor mount position only. The adaptors' prongs are not
designed to hold the weight of unit, so do not connect it to any ceiling, under-the-table, or cabinet
outlets. Otherwise, the adaptors may not properly connect to the mains.
• If the handset will not be used for a long time, disconnect and remove the battery to prevent
possible leakage.
Connect the Base and Charger
Power
wall
outlet
User's Manual Power
adapter
cable
Congratulations
on purchasing your new VTech product. Before using this product, please read Important safety instructions.
This manual has all the feature operations and troubleshooting necessary to install and operate your new
VTech product. Please review this manual thoroughly to ensure proper installation and operation of this
innovative and feature-rich VTech product.
What's in the box
User's
Manual
1 set for VS112A
Warranty
1 set for
Sheet
2 sets for VS112-2A
VS112-2A
Use the phone menu | Call list Overview
4
Display icon
Phone Menu Store a Call List Number into the
Phonebook
You can use the telephone base or a cordless
handset to change your telephone settings. 1. Press CALLS when the handset is not in use.
2. Press q/p to browse through the entries.
1. Press MENU when the phone is not in use.
3. When the desired Call list entry displays,
2. Press q/p until the screen displays the
press SELECT.
desired feature menu.
4. Press q/p to scroll to To Phonebook, then
3. Press SELECT to enter that menu.
press SELECT.
• To return to previous menu, press CANCEL.
5. Use the dialing keys to modify the number
• To return to idle mode, press and hold if necessary, and then press SELECT to
Display
CANCEL. save. icons
Delete an Entry in the Call List
Call List
1. Press CALLS when the handset is not in use.
This feature is available if you have subscribed
2. Press q/p to browse through the entries.
to the Calling Number Display service from
3. When the desired Call list entry displays,
your telephone service provider. Your phone
can store up to 50 received calls with date/time press DELETE.
information in the Call List. The number will be
shown on the LCD when the phone is ringing. Delete all Entries in the Call List
When the number matches exactly with
1. Press MENU when the handset is not in
one of the entries in your phonebook, the
use.
caller's name stored in the phonebook will be
2. Press q/p to scroll to Call log, and then
displayed with the number. If a melody has
been programmed, the handset will ring with press SELECT.
the melody associated with that phonebook
3. Press q/p to scroll to Delete all, and then
entry.
press SELECT twice.
• In idle mode, if three unanswered calls are
received, "3 missed calls" will be displayed.
• Each time you view a Call list entry marked
NEW, the number of missed calls decreases
NEW
by one.
ANS ON
View a Call List entry
1. Press CALLS when the handset is not in use.
/
2. Press q p to browse through the Call list.
1/12
Dial a Call List entry
• When the desired entry appears, press /
HOME or to dial.
6
5 Operate (con't) Phonebook | Call Block
Dial a Redial List Entry While on an outside call, you can use the Phonebook
intercom feature to transfer the call from one
1. Press REDIAL when the handset is not in use. Your phone can store up to 1000 Phonebook
handset to another.
entries with names and numbers. The entries
2. Press p/q or REDIAL repeatedly until the
1. Press MENU on your handset during a call.
are shared by all handsets, covering both locally
desired entry displays.
2. Press p/q to scroll to Intercom, and then
stored contacts and contacts downloaded from
3. When the desired entry displays, press /
press SELECT. The current call is put on hold. mobile phone(s). Each phonebook entry can have
HOME or
to dial. Use the dialing keys to enter a destination maximum of 24 digits for the phone number and
handset number. 15 characters.
Delete a Redial List Entry
3. To answer the intercom call, press /
Store a Number Entry in the Phonebook
• When the desired redial entry displays, press
HOME, /MOBILE, , or any dialing keys
DELETE.
on the destination handset. You can now 1. Press MENU when the handset is not in use.
have a private conversation before
2. Press q/p to scroll to Phonebook, and then
Intercom (for additional handset)
transferring the call.
press SELECT.
4. To transfer the call, press OFF on the
Use the intercom features for conversations 3. Press SELECT again to choose Add new entry.
initiating handset or place the initiating
between two handsets. 4. Use the dialing keys to enter the number (up to
handset back in the telephone base or
24 digits).
1. Press MENU on your handset when not in
charger.
use. 5. Press SELECT to move to the name.
5. To end the call, press OFF on the destination
2. Press p/q to scroll to Intercom, and then 6. Use the dialing keys to enter the name (up to 15
handset or place the destination handset
press SELECT. Use the dialing keys to enter a characters). Additional key presses show other
back in the telephone base or charger.
destination handset number. characters of that particular key.
7. Press SELECT to save.
3. To answer the intercom call, press /
HOME, /MOBILE, , or any dialing keys
Entering Names
on the handset.
Use the keypad letters to enter names, e.g. to store
4. To end the intercom call, press OFF or place Tom.
the handset back in the telephone base or
• Press 8 once to enter T.
charger.
• Press 6 three times to enter o.
• Press 6 once to enter m.
Answer an Incoming Call during an
Intercom Call Tips
• Press DELETE to erase a character or digit.
If you receive an incoming call during an
• Press and hold DELETE to erase all characters or
intercom call, there is an alert tone.
digits.
• To answer a home call, press / HOME. The • Press p/q to move the cursor to the left or right.
intercom call ends automatically.
• Press and hold PAUSE to insert a dialing pause (for
To end the intercom call without answering the entering phone numbers only).
•
outside call, press OFF. The intercom call ends
• Press
and the telephone continues to ring.
appears) (for entering phone numbers only).
• To answer a mobile call, press OFF to end the
• Press 0 to add a space (for entering names only).
intercom call. The telephone continues to ring.
Then, press /MOBILE.
Call transfer using Intercom
8
Answering System (con't)
Play your own announcement
5. Press q/p to choose On or Off.
6. Press SELECT to save and you hear a confirmation tone.
1. Press MENU when the telephone is not in use.
2. Press q/p to scroll to Answering sys, and then press SELECT
Voice guide
twice to select Outgoing msg.
This feature is an alternative way for you to do the basic setup
3. Press 2 to Play, and then press 5 to stop playing.
of the answering system. You can follow the voice guide to
record your own announcement, set the number of rings and the
Delete your own announcement
message alert tone.
1. Press MENU when the telephone is not in use.
1. Press MENU when the telephone is not in use.
2. Press q/p to scroll to Answering sys, and then press SELECT
2. Press q/p to scroll to Answering sys, and then press SELECT.
twice to select Outgoing msg.
3. Press q/p to scroll to Voice guide, and then press SELECT.
3. Press 3 to Delete, and then press OFF to return to the previous
menu. • You hear the voice prompt "Hello! This voice guide will
assist you with the basic setup of your answering system."
Set the Number of Rings
4. Setup your answering system by inputting designated
numbers as instructed in the voice guide.
You can set the answering system to answer an incoming call
after 2, 3, 4, 5 or 6 rings; or time saver. With time saver selected,
Remote Access
the answering system answers after 2 rings when you have new
messages, or after 4 rings when you have no new messages.
A two-digit security code is required to access the answering
This enables you to check for new messages and avoid paying
system remotely from any touch-tone telephone. The preset code
unnecessary long distance charges if you are calling from outside
is 19. You can use this preset code, or set your own from 00 to 99.
your local area.
1. Dial your telephone number from any touch-tone telephone.
1. Press MENU when the telephone is not in use.
2. When the answering system answers, press * and then enter
2. Press q/p to scroll to Answering sys, and then press SELECT.
the two-digit remote access code.
3. Press q/p to scroll to Ans sys setup, and then press SELECT.
3. You can enter one of the following remote commands:-
4. Press q/p to scroll to # of rings, and then press SELECT.
Command Description
5. Press q/p to choose 2, 3, 4, 5, 6, or Time saver.
1 Play all messages.
6. Press SELECT to save and you hear a confirmation tone.
2 Play new messages only.
Note
3 Delete the current message (during playback).
• If you have muted the first ring, you will hear one ring less before the
answering system answers the incoming calls.
33 Delete all old messages.
4 Repeat the current message (during playback).
Message Alert Tone
When the message alert tone is set to on, and there is at least one
5 Stop playing message.
new message, the telephone base beeps every 10 seconds. The
*5 Hear a list of remote commands.
message alert tone is pre-set to off.
6 Skip to the next message (during playback).
1. Press MENU when the telephone is not in use.
*7 Record a new announcement.
2. Press q/p to scroll to Answering sys, and then press SELECT.
8 End the call.
3. Press q/p to scroll to Ans sys setup, and then press SELECT.
0 Turn the answering system on or off.
4. Press q/p to scroll to Msg alert tone, and then press SELECT.
Once you have installed the battery, the handset LCD
display indicates the battery status (see the table below).
Note
• Press CANCEL or place the handset in the telephone base or
charger will by pass the set date and time, and voice guide.
• For best performance, keep the handset in the telephone
base or charger when not in use.
• If you place the handset in the telephone base or the
charger without plugging in the battery, the screen displays
Install the Battery
No battery.
Battery Battery status
indicators
Telephone
wall jack The screen is The battery has
blank, or shows no charge or
Put in charger very little charge.
and flashes. The handset
cannot be used.
The screen The battery has
shows Low enough charge
battery and to be used for a
flashes. short time.
The screen The battery is
Telephone
Line Cord shows charged.
HANDSET X.
Charge the Battery
Place the handset in the telephone base or the
charger to charge.
Handset • Press and hold to erase the missed call
indicator while the phone is not in use.
• Press to return to the previous menu; or
press and hold to return to idle mode,
7 without making changes.
4 –
• Press to enter
when dialing or inputing
numbers.
8 1
5 – VOLUME BOOST
2 • Press to enhance the clarity and loudness
9
3
of the caller's voice during a call.
Icons can be Steadily on (visible),
Flashing or Off (not visible)
6 – REDIAL/PAUSE
The battery icon flashes when the
• Press repeatedly to review the redial list
battery is low and needs charging.
• Press and hold to insert a dialing pause
The battery icon animates when 10 while entering a number.
4
the battery is charging.
11
5 7 – CHARGE light
The battery icon becomes solid
12
6 • On when the handset is charging.
when the battery is fully charged.
There are new voice mail received
8 – / MOBILE
from your telephone service
1 – MENU/SELECT
• Make or answer a mobile call.
provider.
• Show the menu.
On when the home line is in use or
• While in a menu, press to select an item,
there is an incoming home call. or save an entry or setting.
/HOME/RECALL
9 –
Flashes when there is an incoming
VOLUME p Make or answer a home call.
2 – •
home waiting call.
• Press to activate Recall for use with
• Review the phonebook when the
There are MobileConnect devices Telephone Network Services such as Call
handset is not in use.
Waiting during a call.
connected on the devices list.
• Increase the listening volume during a
call.
On when the mobile line is in use
10 –
• Scroll up while in a menu, or in the
or there is an incoming mobile call.
phonebook, Call list, call block list or • Press to enter when dialing or inputing
redial list.
There are new Call list entries. numbers.
• Move the cursor to the right when
The answering system is turned entering numbers or names. 11 –
on.
• Make or answer a call using the handset
VOLUMEqCALLS
speakerphone.
The handset ringer is off. • Review the Call list when the handset is not
• During a call, press to switch between the
in use.
speakerphone and the handset.
Displays the number of messages • Decrease the listening volume during a
you have on the system. call.
12 – MUTE/DELETE
• Scroll down while in a menu, or in the
On when audio booster is • Mute the microphone during a call.
phonebook, Call list, or redial list.
activated (in earpiece mode). • Delete digits or characters while using the
• Move the cursor to the left when entering
dialing keys.
Off when audio booster is numbers or names.
• Silence the ringer temporarily while the
deactivated.
handset is ringing.
3 – OFF/CANCEL
• Delete the displayed entry while
• Hang up a call.
reviewing the phonebook, Call list, call
• Silence the ringer temporarily while the
block list or redial list.
handset is ringing.
Review an Entry 4. Press q/p to browse the entries. When the
desired entry display, press DELETE.
Entries are sorted alphabetically.
5. When the screen displays Delete entry?, press
1. Press when the handset is not in use. SELECT.
2. Press q/p to browse through the phonebook,
Delete ALL Phonebook Entries
or use the dialing keys to start a name search
(you can enter up to 3 characters for the search).
1. Press MENU when the handset is not in use.
3. When the desired entry appears, press
2. Press q/p to scroll to Phonebook, and then
/HOME or to dial.
press SELECT.
3. Press q/p to scroll to Delete all, and then press
Dial a Phonebook Entry
SELECT.
While in the phonebook list, press p/q to select
4. When the screen displays Delete all?, press
the entry you want, or search alphabetically using
SELECT.
the alphanumeric keypad.
• Press / HOME or to dial the selected entry.
Call Block
Search a Phonebook Entry Alphabetically
If you have subscribed to a Calling Number
Display service, you can use the call block
1. In idle, press to access the phonebook. feature to reject certain calls automatically. This is
achieved by adding up to 20 numbers into the
2. Enter the first character of the name by multi-
block list, and/or programming the phone to
tap.
reject all calls without number.
When there is a call from a number saved
Edit a Phonebook Entry
in the block list, or a call without numbers
(when this function is set to on), the call will be
1. Press MENU when the handset is not in use.
disconnected.
2. Press q/p to scroll to Phonebook, and then
• Blocked calls are treated as new call list entries
press SELECT.
and the name in the call list will be replaced with
3. Press q/p to scroll to View, and then press BLOCKED CALL.
SELECT.
Add a Block List Entry
4. Press q/p to browse the entries. When the
desired entry display, press SELECT.
1. Press MENU when the telephone is not in use.
5. Use the dialing keys to edit the number, and
2. Press q/p to scroll to Call Block, and then
then press SELECT.
press SELECT.
6. Use the dialing keys to edit the name, and then
3. Press q/p to scroll to Block list, and then press
press SELECT to save.
SELECT.
4. Press q/p to scroll to Add new entry, and then
to add ( appears) or to add # (
Delete a Phonebook Entry
press SELECT.
5. Use the dialing keys to enter the number (up to
1. Press MENU when the handset is not in use.
24 digits).
2. Press q/p to scroll to Phonebook, and then
6. Press SELECT to move to the name.
press SELECT.
7. Use the dialing keys to enter the name (up to 15
3. Press q/p to scroll to View, and then press
SELECT. characters). Additional key presses show other
characters of that particular key.
Retrieve voicemail from
Telephone service
4. Hang up or press 8 to end the call.
Voicemail is a feature available from most telephone service
Change Remote Access PIN
providers. It maybe included with your telephone service or
may be optional. Fee may apply.
1. Press MENU when the telephone is not in use.
/
2. Press q p to scroll to Answering sys, and then press SELECT.
Retrieve Voicemail
/
3. Press q p to scroll to Ans sys setup, and then press SELECT.
4. Press q / p to scroll to Remote code, and then press SELECT.
When you received a voicemail, the handset displays
5. Use the dialing keys to enter a two-digit number, or scroll to a New voicemail. To retrieve, your typically dial an access
desired two-digit number. number provided by your telephone service provider, and
6. Press SELECT to save, and you hear a confirmation tone. then enter a security code. Contact your telephone service
provider for instructions on how to configure the voicemail
settings and listen to messages.
Turn off the New Voicemail Indicators
If you have retrieved your voicemail while away from home,
and the handset still displays the new voicemail indicators, use
this feature to turn off the indicators.
Note
• This feature turn off the indicators only, it does not delete your
voicemail messages.
1. Press MENU when the telephone is not in use.
/
2. Press q p to scroll to Settings, and then press SELECT.
/
3. Press q p to scroll to Clr voicemail, and then press
SELECT.
Wall mount
2
1. Align the holes on the wall-mount bracket with the standard wall plate and slide the wall-mount bracket down until it locks securely.
2. Plug the provided telephone line cord and the power adapter cable to the base jacks. Thread the telephone line cord and power
adapter cable through the corresponding slot. Plug the other end of the telephone line cord and the power adapter cable into the
telephone wall jack and the power wall outlet respectively.
3. Place the cordless phone over the two retaining screws of your standard wall mount plate as indicated. Slide the phone downward
into position.
4. Mounting is complete.
Note
• It is only suitable for mounting at a height ≥ 2 meters.
Action
B
Charge without
interruption (at least
B B
B B
30 minutes).
Charge without
interruption (at least
30 minutes).
A
To keep the battery
charged, place it in
the telephone base
4
or charger when not
in use.
Base • Press and hold to add or replace a
MobileConnect device.
5 – -VOL
1 • Press to decrease the volume during
message playback.
2
3 • Press to decrease the telephone base
4 ringer volume in idle.
5
• Press to silent the telephone base ringer
6 temporarily during ringing.
VOL+
1 – ANS ON light
• Press to increase the volume during
• On when the answering system is on.
message playback.
IN USE light • Press to increase the telephone base ringer
• On when the handset is in use, or the volume in idle.
answering system is answering a call.
• Flashes when there is an incoming call, or
6 – /HANDSET LOCATOR
another telephone sharing the same line is
• Press to locate the handsets.
in use.
light | light
Charger
• On when the telephone base is paired and
connected with a MobileConnect device.
• Flashes when the telephone base is in
discoverable mode.
2 – X
1
• Press to delete the playing message.
• When the phone is not in use, press and
hold to delete all previously reviewed
messages.
• Press to repeat the playing message.
1 – Charging pole
• Press twice to play the previous message.
• Press to skip to the next message.
• Press to play messages.
• Press to stop message playback.
3 – ANS ON/OFF
• Press to turn the answering system on or
off.
4 – |
• Press and hold to connect the paired
mobile MobileConnect device.
8. Press SELECT to save. 3. Press q/p to scroll to Block list, and then press
SELECT.
Review Call Block List
4. Press q/p to scroll to View.
5. Press q/p to browse the entries. When the
1. Press MENU when the handset is not in use.
desired call block list entry displays, press
2. Press q/p to scroll to Call Block, and then
press SELECT. DELETE.
3. Press q/p to scroll to Block list, and then press
Block Calls Without Number
SELECT.
4. Press q/p to scroll to View.
You can choose to block calls without number.
5. Press q/p to browse the entries.
1. Press MENU when the handset is not in use.
2. Press q/p to scroll to Call Block, and then
Edit a Call Block List Entry
press SELECT.
3. Press q/p to scroll to Calls w/o num, and then
1. Press MENU when the handset is not in use.
press SELECT.
2. Press q/p to scroll to Call Block, and then
4. Press q/p to choose Unblock or Block, and
press SELECT.
then press SELECT.
3. Press q/p to scroll to Block list, and then press
SELECT.
Mute First Ring
4. Press q/p to scroll to View, and then press
Your telephone rings once for blocked calls. You
SELECT.
can choose to mute the first ring for all incoming
5. Press q/p to browse the entries. When the
calls, so that there will be no ring for blocked
desired Call list entry displays, press SELECT. calls. By default, the first ring is set to OFF.
6. Using the dialing keys to edit the number, and
1. Press MENU when the telephone is not in use.
then press SELECT.
2. Press 7464# on the handset.
7. Use the dialing keys to edit the name, and then
3. Press q/p to choose First ring: On to keep the
press SELECT to save.
first ring, or First ring: Off to mute the first ring.
4. Press SELECT to save.
Save a Call List Entry to Call Block List
1. When the desired Call list entry displays, press Note
SELECT.
• If you have muted the first ring, you will hear one
2. Press q/p to scroll to To Call Block, and then ring less before the answering system and voicemail
answer the incoming calls.
press SELECT.
3. Use the dialing keys to modify the number if
necessary, and then press SELECT.
4. Use the dialing keys to edit the name, and then
press SELECT to save.
Delete a Block List Entry
1. Press MENU when the handset is not in use.
2. Press q/p to scroll to Call Block, and then
press SELECT.
Important safety instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of
fire, electric shock and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
4. Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool).
5. Do not expose the telephone to direct sunlight or extreme cold environment. Do not put the telephone close
to heating sources such as radiators, cookers, etc.
6. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
7. Unplug this product from the wall outlet and refer servicing to VTech under the following conditions:
• When the power supply cord or plug is damaged or frayed.
and • If the product does not operate normally by following the operating instructions.
• If the product has been dropped and the cabinet has been damaged.
• If the product exhibits a distinct change in performance.
8. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of
electric shock from lightning.
9. Do not use the telephone to report a gas leak in the vicinity of the leak.
10. Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods for the handsets are only
applicable with the default battery capacities.
11. The use of other battery types or nonrechargeable batteries/primary cells can be dangerous. These may cause
interference and/or unit damages. The manufacturer will not be held liable for damage arising from such non-
compliance.
12. Do not use third party charging bays. The batteries may be damaged.
13. Please note the correct polarity while inserting the batteries.
14. Do not immerse batteries in water, do not place in fire.
Disposal warning
1. When this crossed-out wheeled bin symbol is attached to a product, it means the product is
covered by the European Directive 2002/96/EC.
2. All electrical and electronic products/battery should be disposed of separately from the municipal
waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance/ battery will help prevent potential negative
consequences for the environment and human health.
For more detailed information about disposal of your old appliance/battery, please contact your city office, waste
disposal service or The Shop where you purchased the product.
If you have questions about this product, or having difficulty with setup or operation, please contact our customer
support team.
This telephone is not equipped with a grounding function. Therefore, some of the functions may be limited when
used in PBX systems.
Please contact the technical support of the network provider for further information.
General product care
Taking care of your telephone
Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original packing materials to protect your telephone if you ever need
to ship it.
Avoid water
Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with
wet hands. Do not install the base station near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take
caution when using electrical appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a dry
non-abrasive cloth. Do not use dampened cloth or cleaning solvents of any kind.
Before use
3
Check the Battery Level Check for Dial Tone
Press /HOME. If you hear a dial tone, the
After you have installed the battery, check the
battery level on the handset screen. installation is successful.
• If the battery icon is , , or , then go to Set Date If you do not hear a dial tone:
and Time, and Set the Answering System through
Make sure the installation procedures described
•
Voice Guide.
above are properly done.
• If the screen is blank or flashes, then the battery
• It may be a wiring problem. If you have changed
needs to be charged. Go to Charge the battery
your telephone service to digital service from a
section before you do any setting or operation.
cable company or a VoIP service provider, the
telephone line may need to be rewired to allow
After you install your telephone or power returns
all existing telephone jacks to work. Contact your
following a power outage, the handset will prompt
cable/VoIP service provider for more information.
you to set the date and time and the answering
system through voice guide.
Operating Range
Set Date and Time
Note
• Make sure you set the date and time including the
year correctly; otherwise, the answering system does
not announce the correct day of the week for your
recorded message time stamp.
This handset and telephone base can communicate
1. Use the dialing keys (0-9) to enter the date
over only a certain distance, which can vary with
(DD), month (MM) and year (YY). Then press
the locations of the telephone base and handset,
SELECT.
the weather, and the layout of your home or
2. Use the dialing keys (0-9) to enter the hour
office. When the handset is out of range, the
(HH) and minute (MM). handset displays Out of range or no power at base
alternately.
3. Press SELECT to save.
If there is a call while the handset is out of range,
After the setting for the date and time, the handset
it may not ring, or if it does ring, the call may not
will display Voice guide to... and set up Ans sys?
connect well when you press /HOME or
alternately.
MOBILE. Move closer to the telephone base, and
then press /HOME or
Set Answering System Through Voice
call. If the handset moves out of range during a
Guide telephone conversation, there may be interference.
To improve reception, move closer to the
This feature assists you to do the basic set up of the telephone base.
answering system. You can follow the voice guide
to record your own announcement, set the number MobileConnect
of rings and the message alert tone.
Note
1. Press SELECT to start the voice guide for the
• Make sure your mobile phone has a good mobile
answering system setup. You hear the voice
reception near the telephone base.
prompt Hello! This voice guide will assist you
To use a Bluetooth-enabled mobile phone or
with the basic setup of your answering system.
headset with your VS112 / 112-2A, you must first
2. Set up your answering system by inputting the
pair and connect your Bluetooth-enabled mobile
designated numbers as instructed in the voice guide. phone or headset with the telephone base.
Operate
5
Main Menu Structure Latin character set for inputs
Make a Home Call
1 1 . - ' ( ) * # & / ,
Play Answering sys Phonebook
Press
messages •
2 A B C a b c 2
telephone number. -OR-
OUTGOING MSG ADD NEW ENTRY 3 D E F d e f 3
Enter the telephone number on the handset,
•
DELETE ALL OLD VIEW
4 G H I g h i 4
and then press
RECORD MEMO DELETE ALL 5 J K L j k l 5
Make a Mobile Call
ANSWER ON/OFF
6 M N O m n o 6
7 P Q R S p q r s 7
• Press
VOICE GUIDE
8 T U V t u v 8 the telephone number, and then press
ANS SYS SETUP
MOBILE or to dial. -OR-
9 W X Y Z w x y z 9
• Enter the telephone number on the handset,
0 space 0
and then press
NOTE
Call log Intercom Bluetooth
• After first pressing
VIEW DEVICE LIST
to choose a mobile device. Scroll to select the
DELETE ALL DOWNLOAD PB
desired mobile device when necessary, and
then press SELECT.
ADD BT HEADSET
• While using the mobile line, place your mobile
phone closer to the base, and make sure that
Call block Ringers Set date/
there are no physical obstacles between the
time
base and the mobile phone, such as large
BLOCK LIST HOME VOLUME
furniture or thick walls.
CALLS W/O NUM HOME RINGTONE
Answer a Home/Mobile Call
MOBILE VOLUME
MOBILE
If the handset is on the telephone cradle:
RINGTONE
• Pick up the handset to answer a call when the
phone rings.
Settings
If the handset is NOT on the telephone
CLR VOICEMAIL
cradle:
KEY TONE
• Press
dialing keys.
Mute a Call
The mute function allows you to hear the other
party but the other party cannot hear you.
• During a call press MUTE. The handset display
Muted until the mute function is turned off.
• Press MUTE again to resume the conversation.
The handset displays Microphone on.
7
Sound Settings
Handset Settings Note
• If the handset ringer volume is set to off, then
the handset is silenced for all incoming calls
Set the Key Tone
except paging tone.
You can choose key tone on or off.
Temporary Ringer Silencing
1. Press MENU when the handset is not in
use.
When the telephone is ringing, you can
2. Press q/p to scroll to Settings, and then temporarily silence the ringer of the handset
press SELECT.
without disconnecting the call. The next call
3. Press q/p to scroll to Key tone, and then rings normally at the preset volume.
press SELECT.
• Press OFF or MUTE on the handset. The
4. Press q/p to choose On or Off, and then
handset displays .
press SELECT to save.
Base Settings
Set the Ringer Tone
You can choose from different ringer tones.
Ringer Volume
1. Press MENU when the handset is not in
use. • You can adjust the telephone base volume
level by pressing -VOL / VOL+ on the
2. Press q/p to scroll to Ringers, and then
telephone base when idle.
press SELECT.
3. Press q/p to choose Home ringtone or
Mob ringtone, and then press SELECT.
4. Press q/p to scroll to sample each ringer
tone, and then press SELECT to save.
Note
• If you turned off the ringer volume, you will not
hear ringer tone samples.
Set the Handset Ringer Volume
You can set the ringer volume level, or turn the
ringer off.
1. Press MENU when the handset is not in
use.
2. Press q/p to scroll to Ringers, and then
press SELECT.
3. Press q/p to choose Home volume or
Mobile volume, and then press SELECT.
4. Press q/p to scroll to adjust the volume,
and then press SELECT to save.
Customer service Centre
Unit 1805, Stelux House, 698 Prince Edward Road East, San Po Kong, Kowloon.
Customer Service
If you require assistance in operating this Product please call:
Customer Service Hotline (852) 2666 5558
Technical Inquiry Hotline (852) 2667 7433
Technical specifications
Frequency Crystal controlled PLL synthesizer
control
Transmit 1.88 GHz to 1.9GHz
frequency
Channels 10
Nominal Actual operating range may vary according to environment conditions at the time of use.
effective range
Power Handset:
requirement Battery: CORUN
Ni-MH AAA600mAh 2.4V
2.4V 600mAh
Base / Charger:
Adapter: TEN PAO
Model : S003ATB0600045
Input: 100-240V~50/60Hz 0.15A;
Output: 6.0V, 0.45A
More Info
For the latest information and supports, go and check the online support.
• Scan the QR code below. Hold the device's camera up to the QR code and frame it.
Tap the notification to trigger the redirection of the online help.
- If the QR code is not clearly displayed, adjust your camera's focus by moving your
device closer or further away until it is clear.
Press q/p to scroll to Add BT headset, and
MobileConnect wireless technology operates 3.
within a short range (a maximum of approximately then press SELECT. The screen displays Search
15 feet). When you pair a Bluetooth-enabled headset....
mobile phone to the telephone base, place your
4. Set your headset to discoverable mode. Once
mobile phone closer to the telephone base to
your handset finds your headset, press SELECT.
maintain sufficient signal strength.
• Enter the PIN of your headset if required.
NOTE
The PIN for most Bluetooth-enabled devices
• For optimal performance, place your mobile phone is 0000 (refer to the user's manual of your
next to the telephone base while using the mobile
headset), and then press SELECT.
line.
When the headset is successfully paired and
• To avoid interference from other electronic
connected to the telephone base, the
devices, place your telephone base far away from
devices such as baby monitors, wireless routers, displays on handsets. The 2 light turns on.
microwaves and computers.
Download Contacts from your Bluetooth-
Pair and connect your Bluetooth-enabled
enabled Mobile Phone
Mobile Phone
1. Press MENU when the handset is not in use.
1. Choose a slot to pair the mobile phone.
2. Press q/p to scroll to Bluetooth, and then
Press and hold 1 or 2 on the telephone
base until you hear a confirmation tone, and press SELECT.
the 1 or 2 light flashes.
3. Press q/p to scroll to Download PB, and then
2. Turn on the Bluetooth feature of your mobile
press SELECT.
phone. Once your mobile phone finds your
4. Press q/p to select the desired mobile
VTech phone (VTech VS112 / 112-2A), press
appropriate key on your mobile phone to phone, and then press SELECT.
continue the pairing process.
NOTE
• Your mobile phone may prompt you to enter
the PIN of the telephone base. The default • For certain mobile phones, you may need to
PIN of the telephone base is 0000. press a key on your mobile phone to confirm the
phonebook download.
When the mobile phone is connected to the
telephone base, the corresponding status icon • The performance of phonebook download
feature depends on the compatibility of your
/ ( 1 or 2) displays. The corresponding device light
Bluetooth enable mobile phone. Refer to
( 1 or 2) turns on.
/MOBILE to answer the the user's manual of your mobile phone for
If the pairing fails, turn off the Bluetooth feature on
more information about how that device uses
your mobile phone and on the VS112 / 112-2A by Bluetooth connectivity.
pressing 1 or 2. Then repeat the steps above
• Certain mobile phones do not support SIM card
to pair and connect again. In some cases, it may
download. If this is the case, transfer the contacts
take you a few attempts to complete the pairing
from your SIM card to your mobile phone
process.
memory first. Then download from your mobile
phone memory. For more information on how
Pair and Connect Your Bluetooth-enabled to transfer contacts from your SIM card to your
mobile phone memory, see the user's manual of
Headset
your mobile phone.
1. Press MENU when the handset is not in use.
Press q/p to scroll to Bluetooth, and then
2.
press SELECT.
End a Home/Mobile Call Handset Locator
Press OFF on the handset, or put the handset Use this feature to find all system handsets.
/ HOME or , and then dial the •
in the telephone base or charger.
Start paging
Speakerphone
Press /HANDSET LOCATOR on the base
/ HOME or to dial. •
station. All idle handsets ring and **PAGING**
During a call, press to switch between
•
is displayed on the LCD.
speakerphone and normal handset use.
/MOBILE on the handset. Enter End paging
/ Volume
• Press /HANDSET LOCATOR on the base
station again to stop paging. -OR-
• During a call, press p/VOLUME/q to adjust
the listening volume.
• Press / HOME, /MOBILE ,
/MOBILE to dial.
dialing keys on the handset. -OR-
• The handset earpiece and speakerphone
volume settings are independent. Place the handset in the telephone base or
•
/MOBILE, you may need charger.
Volume Boost
Note
Use the volume boost feature to enhance the
• Do not press and hold /HANDSET LOCATOR
clarity and loudness of the voice on the handset
for more than four seconds. It may lead to handset
earpiece.
de-registration.
Turn on/off volume boost on the handset
Join a Call in Progress (for additional
1. While you are on a call using the handset handset)
earpiece, press on the handset.
You can use up to two system handsets at a time
2. Press again to turn off.
on a home line call.
Call Waiting
• When a handset is on a home call, press
HOME or on another handset to join the
When you subscribe to Call Waiting service from
call.
your telephone service provider, you hear an
alert tone if there is an incoming call while you
• Press OFF to exit the call. The call continues
are on another call.
until all handsets hang up.
Call waiting on the home line
Redial List
/ HOME, /MOBILE, , or any
• Press RECALL to put the current call on hold
Each handset stores the last 10 telephone
and take the new call.
numbers dialed. When there are already 10
Press RECALL to switch back and forth
•
entries, the oldest entry is deleted to make room
between calls.
for the new entry.
Review the Redial List
1. Press REDIAL when the handset is not in use.
/
2. Press p q or REDIAL repeatedly until the
desired entry displays.
8
Answering System
Your answering system has various features, read below for • Press X/DELETE to delete the playing message. The system
the basic settings. advances to the next message.
• Press /STOP to stop.
The answering system can record and store up to 99
messages. Each message can be up to two minutes in
Option during playback on Handset
length. The total storage capacity for the announcement,
messages and memos is approximately 23 minutes. The
• Press VOLUME/ q or VOLUME / p to adjust the message
actual recording time depends on individual message
playback volume.
characteristics.
• Press 6 to skip to the next message.
Your answering system allows you to set your
• Press 4 to repeat the message. Press 4 twice to hear the
announcement, to save and delete messages, activate call
previous message.
screening, to set number of rings before pick up, and to
• Press 3 to delete the playback message.
access remotely.
• Press OFF to stop the playback.
Note
• Press to switch between speakerphone mode and the
• Your answering system will answer call after 14 rings even when it is
handset mode.
turned off. This is to allow the remote access feature to work.
Delete all old messages
Answering System on or off
At Telephone base
The answering system must be turned on to answer and record
• Press X/DELETE twice when the phone is not in use.
messages.
On Handset
On or off with Telephone base
1. Press MENU when the telephone is not in use.
• Press / ANS ON on the telephone base to turn the built-in
2. Press q/p to scroll to Anwering sys, and then press
answering system on or off.
SELECT.
On or off with Handset
3. Press q/p to scroll to Delete all old, and then press SELECT
twice. You hear a confirmation tone.
1. Press MENU when the telephone is not in use.
2. Press q/p to scroll to highlight Answering sys, and then Default Announcement
press SELECT.
3. Press q/p to scroll to highlight Answer on/off, and then The telephone is pre-set with a greeting that answers calls with
"Hello, please leave a message after the tone." You can use
press SELECT.
this pre-set announcement, or replace it with your own.
4. Press q/p to scroll to highlight On or Off, and then press
SELECT to save. You hear a confirmation tone.
Record your own announcement
Message Playback
The announcement can be up to 90 seconds in length.
To playback messages at the telephone base:
1. Press MENU when the telephone is not in use.
• Press /PLAY when the phone is not in use.
2. Press q/p to scroll to Answering sys, and then press
SELECT twice to select Outgoing msg.
Option during playback at Telephone base
3. Press 7 to Record, and then press 5 when you are done.
• Press - VOL / VOL + to adjust the speaker volume.
4. Follow the prompt to speak towards the handset
• Press /SKIP to skip to the next message.
microphone and end recording.
• Press /REPEAT to repeat the message currently playing.
Press / REPEAT twice to listen to the previous message.
A member of THE VTECH GROUP OF COMPANIES.
VTech is a registered trademark of VTech Holdings Limited.
Specifications are subject to change without notice.
©2022 VTech Communications, Inc.
All rights reserved. 01/22 VS112A_VS112-2A_HK_UM_V1.3
2 icon
, or any
/
VTech Communications, Inc.