Sensio BEAM ANGLED ALUMINIUM PROFILE SE982120 Installation Instructions

INSTALLATION
INSTRUCTIONS
IMPORTANT: please read these instructions before commencing installation and retain for future reference.
Components
1x Corner Profile
2 x Mounting Brackets
2 x End Caps
2 x Screws
Important safety information
Please read these instructions carefully before attempting to
install this product. It is advisable to keep these instructions in a
safe place for further reference.
We recommend that you consult a qualified electrician.
All electrical installations must be carried out in accordance
with current IEE wiring regulations (BS7671).
Do not wire the individual LED lights used inside this fitting
directly to the mains.
This product is for indoor use only. Keep out of moisture and
use only in dry rooms.
Safety instructions
1. Before commencing installation of the internal lighting, isolate the main electrical supply for the appropriate circuit at the fuse
board. Ensure the same is done when conducting maintenance.
2. Position this fitting where it will not be exposed to steam or splashes etc.
3. Suitable for furniture lighting.
Waste Electrical & Electronic Equipment (WEEE)
The symbol on the product, or on the document accompanying the product, the crossed out wheelie bin
symbol, indicates that this product may not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronic waste.
BEAM ANGLED
ALUMINIUM PROFILE
Fitting Instructions
Tools Required
6mm
Pencil
Drill Bit
• Install on smooth flat surface(s) only.
CODE: SE982120/SE982220
PZ1 Screw Bit Power Drill