Page 3
Introduction Mounting Assembly Guide I ntroduction In this chapter we would like to introduce the available mounting accessories and their mounting options.
Mounting Assembly Guide 1.1. Introduction The design of Lightware devices allows easy mounting. The holes on the housing can be used to fix the device to a rack or a piece of furniture. Numerous accessories are available, which can be ordered from Lightware, please contact sales@lightware.com.
The screws supplied with the accessories are longer and may be incompatible with some devices due to danger of touching internal parts and damaging the device. If your Lightware device is supplied with fixing screws, use them for fixing.
Step 1. Release and remove the fixing screws of the rack ears on the device (both sides). Certain Lightware devices are assembled with special ears allowing standard rack mounting and other Step 2. Rotate the rack ears by 90° to the desired direction.
The screws supplied with the accessories are longer and may be incompatible with 26.6 some devices due to danger of touching internal parts and damaging the device. If your Lightware device is supplied with fixing screws, use them for fixing.
The screws supplied with the accessories are longer and may be incompatible with 26.6 some devices due to danger of touching internal parts and damaging the device. If your Lightware device is supplied with fixing screws, use them for fixing.
Page 9
The screws supplied with the accessories are longer and may be incompatible with UD Mounting plate F100 some devices due to danger of touching internal parts and damaging the device. If your Lightware device is supplied with fixing screws, use them for fixing.
The screws supplied with the accessories are longer and may be incompatible with some devices due to danger of touching internal parts and damaging the device. If your Lightware Step 3. Fasten the device on the mounting plate with the supplied screws.
Page 12
Introduction Mounting Assembly Guide Mechanical Drawings - UD Mounting Pro P110 P110 Tray P110 Plate 23.25 67.5 Ø6.3Ø4.3x45˚ 2 x 45˚ 127.5 11.5...
The screws supplied with the accessories are longer and may be incompatible with some devices due to danger of touching internal parts and damaging the device. If your Lightware device is supplied with fixing screws, use them for fixing.
Page 14
Introduction Mounting Assembly Guide Mechanical Drawings - UD Mounting Pro P210 and P120/P130 Mounting tray Ø 6.3/Ø 4.3 x 45° 2 X 45° 38.5 93.5 148.5 203.5 258.5 140.5 215.5 23.5 134.5 288.5 Mounting plate PSU plate 11.5 8.25 PSU belt P120...
The screws supplied with the accessories are longer and may be incompatible with some devices due to danger of touching internal parts and damaging the device. If your Lightware device is supplied with fixing screws, use them for fixing.
Page 16
Introduction Mounting Assembly Guide Mechanical drawings - PRC-16 series Front view Top view (Min and Max Depth) 482.6 Rear view 482.6 482.6 Side view...
The screws supplied with the accessories are longer and may be incompatible with some devices due to danger of touching internal parts and damaging the device. If your Lightware device is supplied with fixing screws, use them for fixing.
The screws supplied with the accessories are longer and may be incompatible with some devices due to danger of touching internal parts and damaging the device. If your Lightware device is supplied with fixing screws, use them for fixing.
The screws supplied with the accessories are longer and may be incompatible with some devices due to danger of touching internal parts and damaging the device. If your Lightware device is supplied with fixing screws, use them for fixing.
Introduction Mounting Assembly Guide 1.14. Mounting Bracket Mechanical Drawings - Mounting Bracket The Mounting Bracket makes through-furniture and under-desk mounting easy, while also allowing truss mounting with standard clamps for 1U high devices. The mounting bracket is also designed for truss mounting.
Introduction Mounting Assembly Guide 1.15. Mounting Bracket V2 Mechanical Drawings - Mounting Bracket V2 This accessory has the same features as the Mounting bracket, but the V2 version is designed for other products. It can carry the weight of one 1/2 rack unit (3kg maximum) in any direction, although we recommend using two brackets per unit in fixed installations for perfect stability.
The screws supplied with the accessories are longer and may be incompatible with device (e.g. rear panel of an HDTV): some devices due to danger of touching internal parts and damaging the device. If your Lightware device is supplied with fixing screws, use them for fixing.
Page 23
Compatibility Tables Mounting Assembly Guide C ompatibility Tables In this chapter a list of compatible devices can be found for each mounting accessory.
Compatibility Tables Mounting Assembly Guide 2.5. UCX Devices UD Mounting Plate UD Mounting Plate UD Mounting PSU UD Mounting PSU Rack shelf UD Mounting PSU F120 UD Mounting Pro P110 UD Mounting Pro P210 F100 F110 F100/F110 P120/P130 DCX-2x1-HC10 ...
Need help?
Do you have a question about the Rackmount Cage PRC-16 Series and is the answer not in the manual?
Questions and answers