Clear ED8632TDC Quick Start Manual

Hybrid DVR
Quick Start Guide
1. Notes
● Please read this instruction carefully for correct use of the product and
preserve it for reference purposes.
● All the examples and pictures used here are for reference only.
● There may be several technically incorrect places or printing errors in
this manual. The updates will be added into the new version of this manual.
The contents of this manual are subject to change without notice.
● This device should be operated only from the type of power source indicated
on the marking label. The voltage of the power must be verified before using
the same.
2. HDD Installation
This series of the product supports 4 SATA hard drives. Please make sure that
the device is powered off before the installation. The pictures of the installation
are only for reference, please take the real object as the standard.
① Loosen the screws to open the cover. ② Screw two screws into the holes of HDD
but not tighten them.
④ Install the other three HDDs according
③ Turn over the machine and place the HDD
to above-mentioned method.
with two screws onto the bottom of the case.
Then lock the screws according to the order
of the marks.
⑤ Connect the power and data cables.
⑥ Install the cover back and fix it.
3. Rear Panel Instruction
The interfaces of the rear panel are for reference only.
32 30 28 26 24 22 20 18 16 14 12 10 8 6
31 29 27 25 23 21 19 17 15 13 11 9 7 5
VIDEO IN
4 3 2
4 3 2 1
AUDIO IN
VGA LAN USB ALARM IN
4. Startup & Shutdown
►Startup
① Connect the monitor and the power.
② The device will boot and the power indicator will display blue.
③ A wizard window will pop up.
►Shutdown
Go to "Main Menu" and then select "Shutdown" icon. This will bring up a
shutdown window. The device will shut down by clicking "OK" button.
Then disconnect the power.
5. Login
The default username is admin and the default password is 123456.You must
configure the wizard if you start the DVR for the first time and you can change
the password here. You can skip the settings of wizard next time. Click "Start"
and select "Login". This will take you to see a login box. Input username and
password and you can see the live image.
Login
Username
admin
Enter Password
Password
Display Password Log In Automatically
Edit Security Question
Login
6. Analog Camera Connection
First connect the camera to the DVR. Then go to Start → Settings → Camera
→ Manage Camera → Signal Access Set to checkmark the video mode. The
actual signals input shall correspond to the video mode. Please refer to User
Manual for details.
7. Network Configuration & Add IP Camera
4 2 CVBS
After you finish adding IP cameras, you can see the live images through the
3 1
AUDIO OUT
monitor of the DVR. The following will mainly introduce how to add the IP
1 B A
cameras via LAN/WAN.
ALARM OUT RS485
►LAN
① Set the network of the DVR. Go to Start → Settings → Network →TCP/IPv4.
Input IP address, subnet mask, gateway, etc. If using DHCP, please enable DHCP
in both the DVR and the router.
② Go to Start → Settings → Network → Port. Input HTTP port (the default
value is 80), server port (the default port is 6036).
③ Click "Apply" to save the settings.
④ Go to Start → Settings → Camera → Add Camera. The DVR will automatically
refresh the cameras searched. The IPC which supports the Onvif protocol may
be added manually. If the IPC searched is not in the same local network as the
DVR, you should select the device and click
Quickly Add
Cancel
TCP/IPv4
Port DDNS E-mail UPnP NAT Telnet
IP Address Settings
Ethernet Port 1 ( Online )
Obtain an IP address automatically
IP Address
192 . 168 . 1 . 2
Subnet Mask 0 . 0 . 0 . 0
Gateway 192 . 168 . 1 . 1
Obatin DNS server address automatically
Preferred DNS 192 . 168 . 1 . 1
Alternate DNS 0 . 0 . 0 . 0
to modify the IP address.
Add Camera
Manually Add
No. IP Address Port Edit Subnet Mask Protocol Model Version
1 192.168.2.45 80 255.255.255.0 4.0.0.1.beta1
XXX XXX
Selected: 1/1
Remain Bandwidth: 10 / 10 Mb
Default Password Add
Edit Camera
Mac Address CE :98 :23 :75 :35 :22
IP Address 192 .168 . 1 . 45
Subnet Mask 255 . 255 . 255 . 0
192 .168 . 1 . 1
Gateway
Username
admin
Password
OK Cancel
Cancel