Advertisement
Quick Links
Supported Models
PMC-5231
PMC-5231M
PMC-5236
PMC-5236M
Technical Support
PMC-523x User Manual and Firmware:
http://pmms.icpdas.com/en/download.html
ftp://ftp.icpdas.com/pub/cd/pmc_cd/pmc-523x/
PMC-523x Official Website:
http://pmms.icpdas.com/en/PMC.html
What's in the box?
The package includes the following items:
PMC-523x
PMC-523xM(-3GWA/4GC/4GE)
Pin Terminal* 16
or
[Only for PMC-523xM(-3GWA/4GC/4GE)]
44 mm
DIN-Rail Clip
PMC-523x Quick Start
PMC-5231M-3GWA
PMC-5231M-4GC
PMC-5231M-4GE
PMC-5236M-4GC
PMC-5236M-4GE
microSD card
[ Only for PMC-523xM-3GWA
M3x6L
Screw* 4
v1.2, March 2020
Screw Driver
/4GC/4GE ]
GSM/GPRS Antenna
(ANT-421-04)
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Logicbus ICP DAS PMC-523 Series
- Page 1 PMC-523x Quick Start v1.2, March 2020 Supported Models PMC-5231 PMC-5231M-3GWA PMC-5231M PMC-5231M-4GC PMC-5236 PMC-5231M-4GE PMC-5236M PMC-5236M-4GC PMC-5236M-4GE Technical Support PMC-523x User Manual and Firmware: http://pmms.icpdas.com/en/download.html ftp://ftp.icpdas.com/pub/cd/pmc_cd/pmc-523x/ PMC-523x Official Website: ...
- Page 2 Configuring the Boot Mode Before starting PMC-523x at the first time, be sure that the switch is placed in the “0” position. The rotary switch must be placed in the "0" position Connect to PC, Network and Power The PMC-523x is equipped with an RJ-45 Ethernet port for connection to an Ethernet hub/switch and PC.
- Page 3 Using Browser to Assign a New IP The PMC-523x is an Ethernet controller, which comes with a default IP setting; therefore, you must first assign a new IP setting to the LAN1 port of PMC. The factory default IP settings of PMC are as follows: Item Default...
- Page 4 Go to PMC-523x Web Site for Power Management Please follow the steps below to build a power monitoring and management applications with ICP DAS PMC-523x & Power Meter. Step 1: Open a browser, and type in the URL address of the PMC Open a browser and type in the URL address(The new IP setting) of the PMC in the address bar.
Need help?
Do you have a question about the ICP DAS PMC-523 Series and is the answer not in the manual?
Questions and answers