Page 2
What is “V-ConCall ” “V-concall Kit” is a Plug-n-Play and Easy-to-Use All-in-One Kit to establish the Video Conference System for your Office, Classroom, Home or anywhere. The kit comprises of the following components: • Net’sTV • Video Camera with 4 Built-in Microphones...
Page 3
Introduction V-ConCall Kit is all you need to set up an In-house Video Conference System based on the existing infrastructure that are commonly available in your Office, Conference Room, Home, or other public venues. Simply connect the Video Camera, to a LCD Display, a TV, or even a Net’sTV...
Page 4
Features • Supports Skype, Google Hangout, etc.. • Streaming media, including video, music and photos, over Internet • Local media playback by downloading media to local storage • Supports E-Mail, Browser, Mobile Office, etc... • Supports Google Play for Apps accessibility •...
Net’sTV Specifications - Allwinner H3 SoC, Front Panel - System Status LED - ARM Cortex-A8, - IR Receiver (Hidden behind Panel Plate) - GPU: Mali-400 Rear Panel I/O - RJ45 x 1 (with Status LED) - VPU: 1080P - HDMI 1.4 x 1 Memory - 1GB DDR3 On-board - RCA AV (Video, Audio Right, Left) x 1 Display...
Page 6
Video Camera Specifications Sensor OV9710 1/4 inch CMOS Sensor Resolution 1280x720 Output Image HD, VGA, QVGA, QQVGA Output Format H.264, YUV Frame Rate 22fps at HD, 30fps at VGA Lens and Field of View F/2.0, 3P Lens; FOV(D) 56.8° in HD mode, FOV(D) 50° in VGA mode 1.0x zoom, FOV(D) 30°...
Page 7
Net’sTV Product ID (1) IR Signal Receiver Front View...
Page 8
Net’sTV Product ID (2) WiFi Antenna DC Input AV Connectors LAN HDMI Rear View...
Page 9
Net’sTV Accessories (1) USB Video Camera with Built-in Microphones: 4 Built-in Microphones Camera Status LED Clip on Top of LCD Monotor...
Page 10
Net’sTV Accessories (2) Menu Home Navigation / Selection Keys Back Media Playback Control Cursor Mode Switch Remote Control...
Using Remote Control (1) Net’sTV comes with a Remote Control Unit as part of the standard accessories for the ease of operations with all kinds of TV interfaces. Simply point IR Control to Net’sTV‘s IR Signal Receiver and press buttons to operate. The Remote Control supports “Mouse”...
Using Remote Control (2) Mode Switch • Cursor mode: This mode are for navigation, select, and keyboard input : • Press the cursor mode will switch the remote to cursor mode input. This should do all you want when in the same page. •...
Need help?
Do you have a question about the V-ConCall Kit and is the answer not in the manual?
Questions and answers