Advertisement
Quick Links
1.
Remove existing hook/shackle
from rope loop.
4. Secure the insert completely
within the cavity.
PAGE 1
WINCH SHACKLE MOUNT
INSTALLATION INSTRUCTIONS
2.
Place rope loop in the cavity
of insert. Use insert marked "R"
when using synthetic rope, or "C"
when using steel cable.
4.
5.
Align rope loop, shackle
eyelet, and shackle mount hole.
7.
Allow approximately 20 minutes
for lubricant to dry before pulling
shackle mount tight against
fairlead.
*Shackle is not required to stow the
shackle mount.
2121 Blount Road Pompano Beach, FL 33069
Part Number: 60-12166
3.
Apply two drops of lubricant to
insert and spread evenly. Slip
rope loop and insert into shackle
mount cavity.
6.
Thread shackle pin through rope
loop, shackle eyelet, and shackle
mount hole. Secure shackle as
per normal operation.
MileMarker.com
1.800.886.8647
Advertisement
Related Manuals for Mile Marker 60-12166
Summary of Contents for Mile Marker 60-12166
- Page 1 WINCH SHACKLE MOUNT Part Number: 60-12166 INSTALLATION INSTRUCTIONS Remove existing hook/shackle Place rope loop in the cavity Apply two drops of lubricant to from rope loop. of insert. Use insert marked “R” insert and spread evenly. Slip when using synthetic rope, or “C”...
- Page 2 Mile Marker Industries. If the product was purchased in the United States, the owner must contact our warranty department to get a Return Goods Authorization (RGA) number before returning the product.
Need help?
Do you have a question about the 60-12166 and is the answer not in the manual?
Questions and answers