Related Manuals for fothermo SWD-1600
Summary of Contents for fothermo SWD-1600
- Page 1 PHOTOVOLTAIC SURPLUS MANAGEMENT SYSTEM SWITCHING DEVICE TECHNICAL DESCRIPTIONINSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS WARRANTY CONDITIONS...
-
Page 2: Table Of Contents
OPERATIO N ........................................6 MAINTENANCE AND SERVICING................................7 DISTURBANCES ......................................7 ENVIRONMENTAL PROTECT ION ................................7 WARRANT Y........................................7 Contact: fothermo System AG Phone: +49 (0) 7346 9649960 Im Starkfeld 45b Email: contact@fothermo.com 89231 Neu-Ulm Ulm Registry Court: HRB 739609... - Page 3 Switching device. If the connected load is not compatible with the photovoltaic modules, the electrical consumers can be destroyed. Connectable Electrical Loads Number of outputs for fothermo photovoltaic boiler Max. Power - Output 1 Number of outputs for Micro PV inverters Maximum power of the connected Mircro PV inverter Maximum Power –...
-
Page 4: Specifications
• The connected loads must be compatible with specifications of the photovoltaic modules. the connected photovoltaic panels. fothermo Boiler + Micro PV Inverter* • The device must be installed in a dry place. • Accordingly, only a single module may be connected per input, with the limits specified in the specifications. -
Page 5: Preparation
IMPORTANT! Only photovoltaic modules of the same energy, which can no longer be stored as heat in the type may be connected individually to the inputs of fothermo photovoltaic boiler. the switchboard. * For the connection of an inverter, the use of "Mirco IMPORTANT! A series or parallel connection of the PV inverters"... -
Page 6: Operation
4. Connection of electrical loads: The loads are mounted on the blue terminals. At the first load output – output 1 – the fothermo photovoltaic boiler If, for example, the indicator – Check Output 1 – is is connected. To do this, the terminal labeled Out + is... -
Page 7: Maintenance And Servicing
V1.0 is displayed, and at the bottom right, the output output is indicated. DISTURBANCES If several outputs are active, they are displayed one after the other. If only one output is active, the display If a malfunction occurs during the use of the system, is not switched. - Page 8 V1.0 • improper use, • improper electrical voltage that deviates from the nominal voltage, • exceptional risks, accidents or otherforce majeure, • Failure to comply with the assembly and use - instructions, and • in all cases where an unauthorised person- attempts to repair the device.
Need help?
Do you have a question about the SWD-1600 and is the answer not in the manual?
Questions and answers