Page 4
2. Smart setup Order and directions Maximum range 2.1 Seat height To adjust the seat height, pull the lever at the bottom right of the seat up, allowing the seat to move up or down. For a correct seat height, place your feet flat on the ground and form an angle of 90°...
Page 5
Height pelvic/lumbar support Attention! If your Smart is equipped with a netweave backrest with pelvic/lumbar support, this button will be missing. You can adjust the height of the netweave backrest by lifting it up step by step to one of the four positions. When you raise the backrest to its maximum, it lowers back to the lowest position and you can reset it.
Page 6
2. Smart setup Order and directions 2.4.2 Width control To adjust the width between the armrests, use the levers at the bottom of the chair. Armrest width 2.4.3 Depth function The armrest support can be slid forwards or backwards without any button.
Page 7
2. Smart setup Order and directions 2.5 Static vs. dynamic 2.5.1 Dynamic sitting/ To swing, pull the lever on the bottom of the left side of the chair up. Dynamic Swinging sitting prevents cramping during prolonged sitting. Static sitting can be achieved by pushing the lever downwards.
Need help?
Do you have a question about the Smart and is the answer not in the manual?
Questions and answers