Download Print this page

Grand PATIO SHELL STEEL RATTAN STRING SET OF 3 Assembly Instructions

Download this manual

READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY

1. PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.

2. TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.

3. PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.

4. WASHERS MUST BE USED.

5. WHILE EACH SCREW AND NUT IS PROPERLY FASTENED, DO NOT OVER FASTEN IT.

6. DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE PROPERLY FIXED.

Ax1

Install all the relevant screws,but do not tighten them completely at the very beginning.

Tighten the screws fully one by one.

SHELL STEEL RATTAN STRING SET OF 3

Bx2

ASSEMBLY INSTRUCTIONS

Cx2

Don't tighten up the screw before you start next mounting during the

installation.

Dx1

Need help?

Do you have a question about the SHELL STEEL RATTAN STRING SET OF 3 and is the answer not in the manual?

Page 1 SHELL STEEL RATTAN STRING SET OF 3 ASSEMBLY INSTRUCTIONS READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY 1. PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED. 2. TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
Page 2 CARE AND CLEANING: 1. TO CLEAN, WIPE WITH DAMP CLOTH. DO NOT USE BLEACH, ACID SOLVENTS OR ABRASIVE CLEANERS. 2. THE FRAME HAS A CORROSION-RESISTANT COATING BUT IT IS STRONGLY RECOMMENDED IT IS NOT EXPOSED DIRECTLY TO WET WEATHER FOR PROLONGED PERIODS. 3.