Download Print this page

Streetwize SWREC9B Manual

Dash cam with 2.4” screen

Download this manual

Dash Cam

with 2.4" screen

PLEASE NOTE: THE SWREC9B WILL NEED TO BE CHARGED FOR AT LEAST 30 MINUTES

BEFORE ANY USE. The internal battery for this Dash Cam is for storing the system settings only. The

Camera must be powered by the 12V power cable supplied or hard wired to the vehicle power supply

to record any journeys.

Please read and understand these instructions carefully before operating this

HD Dash Cam and retain for future reference.

SWREC9B

Need help?

Do you have a question about the SWREC9B and is the answer not in the manual?

Page 1 SWREC9B with 2.4” screen PLEASE NOTE: THE SWREC9B WILL NEED TO BE CHARGED FOR AT LEAST 30 MINUTES BEFORE ANY USE. The internal battery for this Dash Cam is for storing the system settings only. The Camera must be powered by the 12V power cable supplied or hard wired to the vehicle power supply to record any journeys.
Page 2 1. Reset hole 5. Menu 9. USB interface 12. I.R. LED’s 15. Recording 2. UP 6. DOWN 10. Mounting 13. Camera Lens Protection 3. Mode 7. On/off/power Bracket 14. 2.4inch LCD 4. OK 8. SD card slot 11. Loud speaker Accessories: User manual, 12V power cable (built-in 12V to 5V adapter), USB cable &...
Page 3 SET-UP: Video recording mode: (1) Please insert the 32gb SD card supplied into the SD card slot (8), the LED will light up blue and red (if the Dash Cam is on). The files will then automatically be saved to the SD card and will loop record (32gb will save approximately 16hrs), unless the Emergency lock is activated, see “Emergency lock”...
Page 4 Technical Support If you require any technical support, please contact us on support@streetwize.co.uk and provide the product name and supplier code (see front) along with the technical query. The WEEE symbol on this product means that this product should be ethically M17 1RY dismantled or recycled to minimise environmental impact.