Related Manuals for Sanipex BAGNODESIGN BDM-MLI-E455 Series
Summary of Contents for Sanipex BAGNODESIGN BDM-MLI-E455 Series
- Page 1 BDM-MLI-E455-XX M-LINE TRIM PART FOR CONCEALED 4 HOLE BATH/SHOWER MIXER W/O HAND SHOWER www.sanipexgroup.com...
- Page 2 IMPORTANT PLEASE READ All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
- Page 3 Install the concealed parts at a depth so that Install the cold water supply from the right finished surface is between the Min/Max and the hot water supply from the bottom(if markings shown above. possible pressure test). Open the valves to test the mixer. Install the face plates, then slide the spout into the spout connector, Install the handles secure by tightening the grub screws.
- Page 4 www.sanipexgroup.com INM-MLI-E455-XX-05-24...
Need help?
Do you have a question about the BAGNODESIGN BDM-MLI-E455 Series and is the answer not in the manual?
Questions and answers