Simple Designs LT2099-OFF Instruction Manual

Instruction Manual for
Thick Base Table Lamp
Questions?
E-mail our customer service department at
customerservice@alltherages.com
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one blade is
wider than the other). As a safety feature to reduce the
risk of electrical shock and fire, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. Do
not alter this safety feature.
This lamp is for indoor use only. The lamp should not be
used near water. Never immerse the lamp in water or
other liquids. Never cover the lamp with any object
including cloth or paper as this is a fire hazard. Do not
handle the bulb immediately after the light is turned off
as it will be hot. This is not a toy.
ASSEMBLY INSTRUCTIONS:
1. Unscrew the socket nut and remove the lamp shade.
Remove the protective plastic. Return the lamp shade to
the body and secure with socket nut.
2. Install bulb. Only use bulb of specified type and
maximum rated wattage or less.
3. Assembly is complete.
4. Plug the electrical supply cord into the wall outlet. Use
the rotary switch located on the cord to turn the lamp
on/off.
CLEANING & MAINTENANCE:
1. Unplug the fixture before cleaning.
2. Use a clean, dry, lint-free cloth. Requires 1 x 60W Type A bulb (not included).
3. Do not use water or other chemical cleaning agents.
1