1. Manuals
  2. Brands
  3. Triplett Manuals
  4. Security Sensors
  5. HVD132
  6. User manual

Triplett HVD132 User Manual

Non-contact high ac voltage detector
Hide thumbs

Advertisement

Table of Contents

User Manual
HVD132
Non-Contact High AC Voltage Detector

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HVD132 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Triplett HVD132

Summary of Contents for Triplett HVD132

  • Page 1 User Manual HVD132 Non-Contact High AC Voltage Detector...

  • Page 2: Table Of Contents

    Index Page 1. Introduction............2. Safety precaution..........3. Applications............4. Features & specifications......... 5. Instrument layout..........6. Operation............7. Maintenance............

  • Page 3: Introduction

    1. Introduction NOTE This detector has been designed and tested according to CE Safety Requirements for Electronic Measuring Apparatus. Follow all warnings to ensure safe operation. WARNING READ "SAFETY PRECAUTION" (NEXT PAGE) BEFORE USING THE HIGH VOLTAGE DETECTOR. 2. Safety precaution Electricity can cause severe injuries with high voltages.

  • Page 4: Applications

    Please keep in your mind to wear high insulated gloves when you test high voltages between 600V~1.5kV. Please keep in your mind to wear high insulated gloves and to use the HVD132 when you test high voltages between 1.5kV~132kV. 3. Applications ● Non-contact detection of live voltages ●...

  • Page 5: Features & Specifications

    ● 2 ranges for selection (2 function buttons) Low : 50V~1.5kV Press the LOW button, HVD132 is ready for low voltage detection. HIGH : 1.5kV~132kV Press the HIGH button, HVD132 is ready for high voltage detection.

  • Page 6: Instrument Layout

    5. Instrument layout TEST HVD132 HIGH (10) (1) Voltage sensor (7) HIGH range LED (2) TEST button (8) The connection point of Hot Stick (3) ON/OFF button (4) LOW range button (9) Battery cover (5) HIGH range button (10) Red LEDs for detection...

  • Page 7: Operation

    ● TEST button Press the TEST button to do the self-test first, this is to make sure the circuits inside the HVD132 is ok. When you press the TEST button, the 2 red LEDs will glow and the buzzer will generate a sound continuously.
  • Page 8 When the probe sensing tip makes contact or is very close to the voltage line, the red LEDs will glow and the sound will last continuously. Voltage detection for a wall outlet For finding a breaker...
  • Page 9 When the probe sensing tip is getting closer to the High voltage source, the red LEDs will glow and the sound will last continuously.   TEST HVD132 HIGH The ideal detection angle...
  • Page 10   TEST HVD132 HIGH For finding a break of cable Voltage detection for a line...

  • Page 11: Maintenance

    7. Maintenance ● Battery replacement (1) Unscrew the battery cover on the rear with a screwdriver, then slide the battery cover off the tester. (2) Take out the battery. (3) Replace with a new battery (9V). (4) Reinstall the battery cover and fasten the cover screws.
  • Page 12 Triplett / Jewell Instruments extends the following warranty to the original purchaser of these goods for use. Triplett warrants to the original purchaser for use that the products sold by it will be free from defects in workmanship and material for a period of (2) two years from the date of purchase.

Table of Contents