Aiwa NSX-AV900 Operating Instructions Manual page 20

Recommended microphones
The use of unidirectional type microphones is recommended to
prevent howling. Contact your local Aiwa dealer for details.
m
When a connected microphone is used, the SURROUND
system and the DOLBY PRO LOGIC are automatically
canceled.
If a microphone is held too near the speakers, a howling sound
may be produced. In this case, hold the microphone away
from the speakers, or decrease the sound level using the MIC
MIXING control.
If sound through the microphone is extremely loud, it may be
distorted. In this case, turn the MIC MIXING control toward
MIN.
VOCAL FADEIUMULTIPLEX FUNCTIONS
VOCAL FADER/
MULTIPLEX
1
it
— .,_,,,
.—. .—. —.
k-
This unit can use discs or tapes as Karaoke sources.
.
Press the VOCAL FADEWMULTIPLEX button repeatedly
to select the vocal fader or multiplex function.
Use the vocal fader function for ordinary discs or tapes.
Use the multiplex function for multi audio discs or tapes.
Each time the VOCAL FADER/MULTIPLEX button is pressed,
one of these functions is selected cyclically.
x
Vocal Fader
The singer's voice becomes softer
+
than the accompaniment.
Auto Vocal Fader*'
The singer's voice becomes softer
only while there is audio input through
1
I*
a microphone,
Multiplex*2
The sound on the left (or right) channel
is heard from both speakers, and the
sound on the right (or left) channel is
muted.
Auto Multiplex*'
The soundon the left(or right)channelis
heardfrombothspeakers,and the sound
on the rightchannelis muted
only while
there is audio input through a microphone.
Cancel
'1To change the time lag
setting of
the Auto Vocal Fader .
or Auto Multiplex function
When Auto Vocal Fader or Auto Multiplex is selected, "A-VF or
"A-MPX is displayed for 3 seconds and changes to the selected
function name. After the selected function name is displayed,
hold down the VOCAL FADER/MULTIPLEX button until the
desired time lag setting, SLOW or FAST, is selected.
SLOW
Fade out of original singer's voice returns to the normal level
if there is no audio input from the microphone within 2
seconds.
FAST
Fade out of original singer's voice returns to the normal level
if there is no audio input from the microphone within 0.5
seconds.
When the power is turned off, the Auto vocal fader and Auto
multiplex restore to SLOW.
*2
To change the muted channel of the Multiplex function
When Multiplex is selected, "MPX-L" is displayed for 3 seconds
and changes to selected function name. After the selected
function name is displayed, hold down the VOCAL FADER/
MULTIPLEX button until the channel to be output from both
speakers, MPX-L or MPX-R, is selected.
MPX-L
The sound on the left channel is heard from both speakers
and the sound on the right channel is muted.
MPX-R
The sound on the right channel is heard from both speakers
and the sound on the left channel is muted,
When the power is turned off, the Multiplex restores to MPX-L.
When using the remote control
Press the KARAOKE button.
The VOCAL FADER functions may not operate correctly with
the following kinds of CDs or tapes.
-
Those with monaural sound
- Those recorded with strong echoes
- Those with the vocal part recorded on the right or left side of
the sound width
While the VOCAL FADER function is on, the sound is output
as monaural.
1 1
19
ENGLISH