MESTAR MI8SFLSLS6-40W Installation Manual

FLUX - LED SOLAR STREET LIGHT
A. INSTALLATION
1. Fix landing base by concrete.
3. Fix luminaires with pole by screws.
*WARNING
1. Carefully unpack the carton. Check the contents to
ensure that all parts are present and have been
received in good condition.
2. If don't use, should be put in the right place to
avoid fire and explosion or causing environmental
pollution.
3. Contact the manufacturer if need help. Don't
install it if don't know the pieces of information.
4. Don't disassemble or change parts of luminaires.
5. Don't physical impact or use of chemicals that
deform the luminaires and affect the surface paint.
Users must follow the safety instructions, specifications and warning notes written in this manual. If don't follow it, we will not be responsible for the warranty.
We reserve the right to make technical and design changes.
THIEN MINH MECHANICAL - ELECTRIC JSC
Head office: MESTAR Building, No. 98/11 Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh City, Vietnam
Tel: (84) 28.3899 4790 - Email: mestar@mestar.vn - Web: www.mestar.vn
Concrete
4. Fix pole with landing base by nut.
。
2. Take away magnet iron sheet on magnet power switch.
Magnet power switch
5. Completed install.
7. Use insulated gloves during product installation.
8. This products must be installed and maintained by
a qualified electrician.
10. The product must be installed in environment ≤IP65.
12. Check luminaire is fixed and secure after installation.
16. Projects near sea should use optional luminaires
with high anti-corrosion and sea salt resistant paint.
INSTALLATION MANUAL
IP65
Dust tight. No ingress
of dust
Water jets against the
enclosure at any angle