Page 1
Jump Starter – JS25 User Manual [Revision 2.0 March 2019] READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.
Jump Starter - JS25 Safety Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or equipment or property damage if not understood or followed. Safety messages have the following symbols: You WILL be KILLED or...
Page 3
Jump Starter - JS25 General Electrical Safety General Electrical Safety General Service Information • Inspect electrical equipment, extension • Electrically grounded equipment must • The equipment must be serviced or cords, power bars, and electrical fittings have an approved cord and plug and repaired at authorised service centres for damage or wear before each use.
Jump Starter - JS25 Safety Symbols The product may have safety warning labels attached to it, explained below. Understand the symbols on your product and their meanings. If any stickers become unreadable, unattached etc, replace them. Flammable Material Hazard Read User Manual...
Page 5
Jump Starter - JS25 Carbon-Monoxide Hazard Pull Hazard Slope / Fall Injury Hazard "Slam Dunk" Warning Do not use the product in Be aware that the product Be aware that using the Do NOT attempt "slam dunk" confined areas or without...
Jump Starter - JS25 Operation The Jump Starter is designed to boost a vehicle battery that has been unintentionally drained or weakened. This Jump Starter may not start a vehicle with a battery that is completely dead or damaged. Indicator Lights 1.
Jump Starter - JS25 Jump Start a Vehicle 1. Check that the battery power level has at least 3 solid lights. 2. Remove the vehicle key from the ignition. 3. Insert the blue plug of the Smart Jumper Cables into the Smart Jumper Cable Input Socket. Make sure the blue plug is fully secured into the socket.
Jump Starter - JS25 Lithium Battery Care and Maintenance Top Battery Care Requirements 1. Charge battery before first use. The unit may arrive with some charge, regardless of this it must be charged for 5 hours before first use. Refresh the charge every 2-3 months.
Jump Starter - JS25 Specifications Model JS25 Type Jump Starter Input 15V 1A USB Output 5V / 2.1A Output Interface 12V/16V/19V / 3.5A Start Current 350A Peak Current 700A Capacity 25000mAh Operating temp -20℃~60℃ Battery Type Lithium-Polymer Power Plug Australian Standard E&OE...
Need help?
Do you have a question about the JS25 and is the answer not in the manual?
Questions and answers