MATHEW S100 Manual

USER GUIDE
Mechanical Keyboard
※ S100 Mechanical keyboard※
Manufacturer:MATHEW TECHNOLOGY LIMITED
Execution standards：GB 4943.1-2022
Connection
2.4G Pairing:Ａfter the keyboard is turned on,Press Fn+R to
enter 2.4G mode.at this time,the Ｒ flash slowly,Ｌong press
Fn+R for 3seconds to enter Pairing mode.the R flash ｑuickly
plug the receiｖer now.after pairing success,The R will
Bluetooth pairing:Ａfter the keyboard is turned on,Press Fn+Ｑ/W/Ｅ
to enter bluetooth mode.at this time,the Ｑ/W/Ｅ flash slowly,Ｌong
press Fn+Ｑ/W/Ｅ for 3seconds to enter Pairing mode.the Ｑ/W/Ｅ flash
ｑuickly,open your computer bluetooth and searching,once keyboard
show up,connect the keyboard.after pairing success,The Ｑ/W/Ｅ will
stop flashing.
Wired connection:turn off the keyboard and plug type-c cable.
Guarrantee Car d
Customer Information
User's Name:
Tel. No.:
E-mail:
Model No. of Purchase:
Date of Purchase:
stop flashing.
Keyboard Featur es
Ergonomic Design N-Key Rolover
Cool Lighting
P r o d u c t D i a g r a m
Detachable
Type-C Cable
Note: Product due to different production batches of key position or function
will be slightly changed, subject to the actual product. The factory specifications
of the product are semi-finished products without key caps, customizable DIY
mechanical keyboard