Download Print this page

Beacon ALPHA Series Installation Instructions

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS - ALPHA FLOODLIGHT
WARNING! Fixtures must be grounded and installed in accordance with the National Electrical Code and all local codes.
Failure to do so may increase the RISK OF PERSONAL INJURY, PROPERTY DAMAGE, FIRE AND DEATH. Install and
use so fixture failures do not cause a hazard and use only in environments for which the product is specifically marked.
WARNING! This product contains chemicals known to the State of California to cause cancer, birth defects, and/or other
reproductive harm. Thoroughly wash hands after installing, handling, cleaning, or otherwise touching this product.
CAUTION! Follow ALL luminaire recommendations, product markings, instructions, restrictions and warnings regarding
luminaire operation and burning position. Luminaire label shows electrical and environmental requirements and
restrictions.
All electrical work must be done by a qualified electrician.
Turn off electric power to all affected circuits and allow to cool before servicing.
A regularly scheduled maintenance program should be established to retain optimum light output and reduce heat
retention. Dusting with a soft, clean, dry cloth is normally sufficient for the optical system. Any accumulation of dust or dirt
should be removed regularly.
Carefully read these instructions before installing product. If you do not understand these instructions, before starting any
work, contact your Hubbell Lighting distributor or techsupport@hubbell-ltg.com or (864) 678-1000
Give instructions to facility owner/manager for future reference.
NOTE:
This luminaire is designed for outdoor lighting applications and should not be used in areas of high ambient
temperature or limited ventilation, or in enclosures.
WARNINGS:
Dangerous voltages exist within the unit and all precautions usually observed in handling high voltage
equipment should be observed when replacing light engine or otherwise servicing luminaires. Disregarding this
warning could result in electrical shock and possible injury to the individual installing or servicing this equipment.
Installation and servicing should be done by qualified personnel.
Remove all packaging materials from fixture before installing the fixture.
2041 58th Ave Cir E, Bradenton, FL 34203 (800) 345-4928
SAVE THESE INSTRUCTIONS
READ THOROUGHLY BEFORE INSTALLING
INSTALLATION INSTRUCTIONS
ALPHA - SERIES
www.beaconproducts.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the ALPHA Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Beacon ALPHA Series

  • Page 1 INSTALLATION INSTRUCTIONS - ALPHA FLOODLIGHT SAVE THESE INSTRUCTIONS INSTALLATION INSTRUCTIONS ALPHA - SERIES READ THOROUGHLY BEFORE INSTALLING WARNING! Fixtures must be grounded and installed in accordance with the National Electrical Code and all local codes. Failure to do so may increase the RISK OF PERSONAL INJURY, PROPERTY DAMAGE, FIRE AND DEATH. Install and use so fixture failures do not cause a hazard and use only in environments for which the product is specifically marked.
  • Page 2 INSTALLATION INSTRUCTIONS - ALPHA FLOODLIGHT 1. To prepare luminaire for installation the cover (Item 4) must be removed. If necessary, loosen handle by turning counterclockwise and pivot heat sink/optical assembly (Item 1) forward/downward. Loosen (do not remove) four captive screws (Item 5) and lift out the cover (Item 4).