Basics - ITech FUSION 2 User Manual

BASICS

Learn how to best navigate your iTech Fusion 2 Smartwatch.
Power On/Off Your Smartwatch
Tap and hold the screen of your smartwatch
for 5 seconds until you see the iTech Fusion
Smartwatch logo appear on the watch
screen, indicating the watch has
powered on.
On the main clock face, swipe down from the
top of the screen to reveal the notification
panel. Tap the 'Settings' icon here and you will
be taken to the settings screen. Scroll down to 'Power off'. After tapping on this selection, the smart-
watch will ask if you're sure you would like to turn off the device. Once you tap on the blue check
mark, the device will power off immediately.
Motion Gesture
Allows you to rotate your wrist to turn on your watch screen. Tap the 'Menu' located on the top
left of the home screen. Then tap on 'Settings'. From here tap on, 'Motion Gesture', to access this
function and set it up. You can control the time in which this feature is active throughout the day.
If you want this feature to always be on, set the time constraints to be 12:00AM to 12:00AM.
Using this feature will consume more battery.
Brightness
Control the Brightness on your Smartwatch. From the Settings menu on your iTouch Sport, tap
the brightness icon. Then tap again to begin adjusting the brightness by tapping your finger on
the screen. Once you have set the brightness the way you like, tap the back button on the top left
hand corner to exit and save your changes.
Changing Watch Faces
Change your watch face from the iTech Fusion 2 Smartwatch
The iTech Fusion 2 Smartwatch comes with four interchangeable watch faces built into it. From
the main clock face screen on your smartwatch, hold the center of the screen for 3 seconds to
switch the clock face. Swipe from left to right to see the selections. Tap on the clock face you
want. Your smartwatch will vibrate once the clock face has changed.
Change your watch face from the iTech Wearables App
Setting a Custom Watch Face: Create your own watch face! You can add your own image, format
text, and put your favorite features on display.
In the iTech Wearables App, from the Watch Faces page, tap on the Custom watch face panel to
5
begin editing. Hit Save/Done to apply.