Summary of Contents for ELZAB ECOPOWER CC City
- Page 1 INSTALLATION AND OPERATING MANUAL Electric vehicle charging station CC City (LAD0/2x22kW)
-
Page 3: Table Of Contents
Installation and operating manual for the CC City (LAD0/2x22kW) Revision 1.2 ABLE OF CONTENTS Introduction____________________________________________________________ 4 Package content ________________________________________________________ 4 General information _____________________________________________________ 4 Components of the charging station ________________________________________ 5 Installation _____________________________________________________________ 6 5.1 Assembly of the housing _______________________________________________ 7 5.1.1 Installation on the foundation foot ___________________________________________ 7 5.1.2 Installation without the foundation foot _______________________________________ 7 5.2 Opening and closing the charging station __________________________________ 8... -
Page 4: Introduction
Installation and operating manual for the CC City (LAD0/2x22kW) NTRODUCTION Thank you for choosing the ECOPOWER ELZAB electric vehicle charging station. This manual applied to the CC Wall charging station. It contains important information for proper installation and safe operation of the charging station. -
Page 5: Components Of The Charging Station
Installation and operating manual for the CC City (LAD0/2x22kW) OMPONENTS OF THE CHARGING STATION Front of the charging station Side of the charging station (socket option) (cable option / socket option) CC City charging station Antenna LED indicator (indication of the status of the charging point) RFID card reader Description of the system signalling the status of the charging point Depending on the execution option:... -
Page 6: Installation
Installation and operating manual for the CC City (LAD0/2x22kW) NSTALLATION The CC City Charging Station is designed to be installed in public areas. The station can be installed in areas such as concrete surfaces, green areas, sand, asphalt surfaces. Do not install the station: •... -
Page 7: Assembly Of The Housing
Installation and operating manual for the CC City (LAD0/2x22kW) 5.1 Assembly of the housing 5.1.1 Installation on the foundation foot Foundation foot for charging station The foundation foot must be installed in a hole measuring 50 x 50 cm and 90 cm deep. The bottom of the hole must be stable, and the foundation foot must be correctly positioned. -
Page 8: Opening And Closing The Charging Station
Installation and operating manual for the CC City (LAD0/2x22kW) • the gauge is aligned with the holes in the foundation foot, • protrusion above the ground surface: max. 25 – 40 mm. 5.2 Opening and closing the charging station Removing the cover Access to the station is protected by a door with locks. -
Page 9: Fitting The Seals
Installation and operating manual for the CC City (LAD0/2x22kW) 5.4 Fitting the seals After connecting the power cable and closing the charging station, install the disposable seals that are attached to the station. Degrease the edge of the station housing where the seal is to be bonded. Attach one seal to the front and one to the back of the station as shown below. -
Page 10: Activation
Installation and operating manual for the CC City (LAD0/2x22kW) Check whether additional steps are necessary to ensure safety at the installation site. Make sure that there are no obstructions around the installation site. The producer is not responsible for the use of the appliance connected to a faulty electrical installation or not in accordance with the applicable regulations. -
Page 11: Operation
Installation and operating manual for the CC City (LAD0/2x22kW) LED of the charging point RFID card reader Indication of the status of the charging point controllers: LED controller Status of the charging point colour status green flashing point ready for charging blue continuous vehicle being charged... - Page 12 Installation and operating manual for the CC City (LAD0/2x22kW) To start the vehicle charging procedure, proceed as described below. Check that the selected charging point is ready to connect and charge the vehicle - the charging point LED indicator flashes green at regular flashing green intervals.
-
Page 13: Maintenance
Installation and operating manual for the CC City (LAD0/2x22kW) For a charging point with a cable, place the charging plug in the holder on the charging station. The charging point is ready to charge another vehicle. NOTE: Do not pull/remove a plug that is locked when the vehicle is being charged from the charging socket. -
Page 14: Service, Repair And Upgrades
Installation and operating manual for the CC City (LAD0/2x22kW) once a year • periodic service inspections - include checking that the device and all its components are in a condition which allows their correct and safe use; • electrical measurements - include measurement and control of the safety performance of the device and of the installation, for safe operation of the device For a detailed description of all required service and electrical measurements, refer to the Service... -
Page 15: Safety
Installation and operating manual for the CC City (LAD0/2x22kW) NOTE: If you try to repair the charging station without consulting the service department, the device may be damaged. The producer and the supplier of the device are not responsible for unauthorized repairs that may pose a threat to life and health for the station users. 10 S AFETY NOTE:... -
Page 16: Technical Specification
Opening or removing the housing of the charging station exposes you to the risk of electric shock! 11 T ECHNICAL SPECIFICATION Device type: AC electric vehicle charging station ELZAB ECOPOWER CC City ELECTRICAL PARAMETERS AC supply: 3 x L, N, PE AC voltage: 400 V ±5%... -
Page 17: Guarantee
Installation and operating manual for the CC City (LAD0/2x22kW) DIMENSIONS AND WEIGHT Dimensions (H x W x D) - depending on the execution option with 1/2 sockets: 1360 mm x 262/262 mm x 217 mm with 1/2 cables: 1360 mm x 481/700 mm x 217 mm Charging cable length: 5 m (for option with cables) Weight:... -
Page 18: Transport And Storage
Installation and operating manual for the CC City (LAD0/2x22kW) 13 T RANSPORT AND STORAGE • Store the station in a dry room. • Store all charging stations vertically. • Anti-corrosion coatings must be protected against mechanical damage as any damage to the coating may cause corrosion. - Page 19 ELZAB SA ul. ELZAB 1 41-813 Zabrze, PL +48 32 272 20 21 ecopower@elzab.pl http://ecopower.elzab.pl www.elzab.pl www.facebook.com/ELZABECOPOWER www.youtube.com/ELZABSA1969 www.linkedin.com/company/elzab-s.a./ www.instagram.com/elzab_sa/ LAD0IOA0...
Need help?
Do you have a question about the ECOPOWER CC City and is the answer not in the manual?
Questions and answers