Download Print this page

tagra SYNDEO Plug & Play User Manual

24v led sensors

Advertisement

Quick Links

Precautions
Installation Notes
Install in accordance with the IEE wiring
regulations and building regulations.
This product must be installed by a suitably
competent person.
Keep away from children. Not a toy.
Contains small parts. Possible choking and
suffocation risk.
Electrical
When installing the battery, check the polarity is correct.
Do not modify wiring.
Do not use this product if there is any visible damage.
Ensure the product is in good working condition. If there is visible damage do not use.
Maintain connections are clean and free of debris.
Mechanical
Do not use the product if damaged.
This remote only controls specified Syndeo products; not all Syndeo products can work with this remote.
Handle with care. Take care not to dislodge any components during installation.
The product should be mounted only using the recommended accessories.
Environmental
The product should only be used in an environment with an ambient temperature between -10°C to +40°C.
The product should only be stored in an environment with a temperature between -20°C to +70°C.
IP20 products are not waterproof and can only be installed indoors and with humidity of no more than 55%.
Only install in a location free from chemicals, gases and flammable materials.
For indoor and dry location use only.
Product Warranty
1.
A warranty period is provided for products in normal use. For any faults arising during the period that are confirmed to be
quality related by inspection by the company, a product of the same specification will be replaced for free.
2.
The warranty does not cover any of the following:
( 1 ) Any product damage due to usage not allowed in the instructions.
( 2 ) Any product damage due to disassembling or wrong operation by the user.
( 3 ) Severe appearence damage or deformation of the product.
Plug & Play 24V LED Sensors
IMPORTANT
Please read these instructions before commencing any work.
Please retain these instructions for future reference.
Please refer to product listing for detailed information.
Remove all packaging before connecting to power supply.
0161 442 1180 | Southfield Ind. Estate, Trafford Park, Manchester, M17 1SJ
Plug & Play 24V LED Sensors
‣ Door Sensor, PIR Sensor, IR Motion
Touch Dimmer, CCT Touch Dimmer
User Manual
Plug & Play 24V LED Sensors
0161 442 1180 | Southfield Ind. Estate, Trafford Park, Manchester, M17 1SJ
v3

Advertisement

loading
Need help?

Need help?

Do you have a question about the SYNDEO Plug & Play and is the answer not in the manual?

Questions and answers

Summary of Contents for tagra SYNDEO Plug & Play

  • Page 1 Precautions Plug & Play 24V LED Sensors IMPORTANT ▶ Installation Notes Please read these instructions before commencing any work. ‣ Door Sensor, PIR Sensor, IR Motion ▶ Please retain these instructions for future reference. ▶ Install in accordance with the IEE wiring ▶...
  • Page 2 Replacing Battery Sensor Functions Door/Cabinet Sensor Distance range: 0-120mm Remove sensor from Flip and slide off back plate Insert CR2450 battery as Replace back plate and test mounting case. from sensor. shown. sensor. PIR Sensor Distance range: 0-3000mm, Angle: 80° Installation Recessed IR Motion...