Denon DN-HC4500 - DJ Mixer USB Controller Operating Instructions Manual
Usb midi / audio interface & controller
Hide thumbs
Also See for DN-HC4500 - DJ Mixer USB Controller:
- Operating instructions manual (108 pages) ,
- Quick start manual (5 pages) ,
- User manual (2 pages)
Related Manuals for Denon DN-HC4500 - DJ Mixer USB Controller
Summary of Contents for Denon DN-HC4500 - DJ Mixer USB Controller
- Page 1 USB MIDI / AUDIO INTERFACE & CONTROLLER USB MIDI / AUDIOインタフェース＆コントローラ DN-HC4500 OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI INSTRUCCIONES DE FUNCIONAMIENTO 取扱説明書...
-
Page 2: Important Safety Instructions
To reduce the risk of fire and electric shock, this apparatus should not type plug has two blades and a third grounding prong. The wide blade or the be exposed to rain or moisture and objects filled with liquids, such as third prong are provided for your safety. - Page 3 • Do not expose the set to dripping or splashing fluids. • No debe colocarse sobre el aparato ninguna fuente inflamable • No objects filled with liquids, such as vases, shall be placed on sin protección, como velas encendidas. the apparatus.
- Page 4 To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. with the local recycling regulations.
-
Page 5: Table Of Contents
3.5mm stereo offers two lines of character information to mini cable Check that the following parts are included in addition to the main unit: quickly navigate through your files, crates, folders and confirms you loaded the correct file without Recessed Side Panel for Easy Connections q Audio cord ............2... -
Page 6: Connections
• Be sure to use the supplied control cord. Using another type of cable may result in damage. USB port, use the included USB cable. • Be sure the power is off when connecting the control cord. Otherwise the units may not work properly. • When connected, the display below appears at the bottom right of the PC’s screen. -
Page 7: Part Names And Function
!4 !6 o !1 !3 !5 CAUTION: Note that there are many buttons working two different function selected by short time pushing or long pushing (1second or more). The “ ” mark indicates short time push function and “ ” mark indicates long time push function. - Page 8 [When DN-D4500 connected] Refer to the PCDJ’s manual. Push this button for more than 1 sec to select • Use this to set the B point for to create a the pitch range. [When DN-D4500 connected] Seamless Loop after the A point has been •...
-
Page 9: Device Change
Visual Marker Press the SOURCE button Press the knob again to enter. • If the time to the end of the track is shorter • The playback position is indicated according to display the “SOURCE” “Completed!” is displayed and source than the specified time, the playback position to the playback status of the different decks. -
Page 10: Basic Operation
ENGLISH 5 BASIC OPERATION Pitch Bend With PITCH BEND function you can change pitch This section describes the basic operations when connected to a DN-D4000/D4500/BU4500. temporary. DN-D4000/D4500/BU4500 has two ways for this function PITCH BEND buttons and PLAY and PAUSE Adjusting the pitch JOG disc. -
Page 11: Seamless Loop/Hot Start/Stutter
When A1 or A2 button B point moves to the point at which the is pushed, Hot Start button was pushed. playback starts from • When the B point is set, the B and “ ” the corresponding A displays light. point. -
Page 12: Trim
(4) Unit No. Set: 1 to 15 / ALL* 7 TRIM Sets the device’s unit number. For example, when two devices are connected to a PC, set one device to “No. 2” or the like. For instructions on the trim function, refer to the NOTE: (5) MIDI CH Set: 1&2* / 3&4 / 5&6... -
Page 13: Asio Control Panel (Windows Version Only)
A window for verifying whether or not to This is the window displayed during create icons on the desktop appears. installation. If you want to create the icons on the Installing the ASIO driver desktop, check the checkbox, then press the “Next>” button. - Page 14 Starting Up The sampling rate selection is displayed here. When the DENON DJ ASIO driver’s “ASIO Control Panel” is called out from the host application, the The frequencies with which the DENON DJ DENON DJ ASIO driver displays the ASIO control panel.
-
Page 15: Updating
2 Uninstalling (Windows version only) Uninstall at the “Add or Remove Programs” control panel. Installing the update program (Macintosh version) With installation of the Macintosh version of the update program, the program itself is copied onto the Diagram: License Agreement window computer. ENGLISH... - Page 16 “DENON DJ Upgrade program” screen. The panel: Connect the computer by USB cable. If the device is not connected or not in the Load button can now be selected. During file transfer: update mode at this time, the screen shown below is displayed.
-
Page 17: Updating
Quit the updating program and turn off the DN-HC4500’s power. NOTE: • Do not turn off the set’s power or disconnect the cable connecting it to the computer during loading or version updating. Also, do not press any buttons on the set or any keys on the computer’s keyboard. -
Page 18: Midi Commands
Data transmission 36 Preset Mode 0x52 Note ON/OFF SW OFF : 0x8n SW OFF : 0x00 The panel operation data is transmitted by MIDI command, as per the table below. 37 D4500 Cont. mode ≠ 0x53 ≠ ≠ Reverse 0x3F ~ 0x00... - Page 19 The various VFD symbols can be set to on, off or blinking, as per the table below. LED data reception 2 Receive command for VFD Symbol The panel’s LEDs can be set to on, off or blinking by MIDI command, as per the table below. MIDI command 2 Receive command for LED...
- Page 20 ENGLISH VFD parameter data reception MIDI command items Message type The time-related display and segment display can be set by MIDI command, as per the table below. Command Number Value 2 Receive command for VFD Parameter ON TRG : 0x4D ↓...
- Page 21 ENGLISH VFD segment data reception MIDI command Items Message Type The various segments are set by 2-byte data, as per the following font code. Command Number Value (0x00/0x00 to 0x00/0x07 cannot be used.) VFD Parameter 2 Font codes for segments...
- Page 22 The text shown below is returned from the DN-HC4500. [DSM] Preset data Item Data Length The DN-HC4500’s presettings can be loaded and some items can be set from an external device using Start of System Exclusive 0xF0 1Byte the DENON DJ’s MIDI system exclusive format.
-
Page 23: Troubleshooting
• Is the sampling frequency setting appropriate? Communication format 0x12: one way 1Byte \Either make the same settings in the DN-HC4500’s preset mode and on the application or set the Model number 0x41 (DN-HC4500) 1Byte DN-HC4500’s preset mode to “AUTO”. -
Page 24: Specifications
Analog output: 1, 2 RCA pin: unbalanced MIDI: Pitch bend 2Vrms = 0dBFS (MIDI data –100 %: 0x7F7F / ±0 %: 0x4000 / +100 %: 0x0000) DA converter: Type 24bit 32times oversampling Fs: 44.1 kHz/48 kHz/96 kHz Parameter knob: SW for Enter and others... - Page 25 Printed in Japan 00D 511 4693 201...