TROUBLESHOOTING
Most problems with your TuneStudio can be solved quickly by following the advice in this chapter.
If you continue to have trouble, contact Belkin Customer Service at 800-223-5546 ext. 2263 or on the
web at http://www.belkin.com/support.
If the Recording Menu button doesn't work:
• Make sure you're using an iPod 5th generation (video). This button does not work with the iPod classic.
• If you are using the iPod classic, simply navigate to the "Voice Memo" menu on the iPod itself.
If your TuneStudio won't turn on:
• Make sure you're using the supplied 12V 1.25A power adapter.
• Try using another power outlet.
If you don't hear anything in the studio monitors or headphones:
• Make sure your TuneStudio is plugged in and turned on.
• Make sure the cables are securely connected.
• Verify your source is playing.
• Turn up the level control(s).
If these suggestions don't help, you might have a bad cable. Check all of your cables and try replacing them
with known good ones.
If the microphone volume is too low:
• Make sure the cables are securely connected.
• If you are using a condenser mic, try turning on phantom power.
• If the microphone is connected to channel 1 or 2, turn up the gain control.
If an instrument's volume is too low:
• Make sure the cables are securely connected.
• Turn up the instrument's volume. If the volume is still too low, check the instrument by connecting your
headphones to the instrument.
• Adjust the channel's level control.