Page 1
Specification, Installation and Operation Manual Woodson Contact Grill Models: W.CT6 & WCT8 A guide on the use, care and maintenance of your quality Woodson product Rev: A - 08/11/2017...
Page 2
Page Intentionally Left Blank www.stoddart.com.au Page 1 Due to continuous product research and development, the information contained herein is subject to change without notice.
4� Warranty Claim Procedure ������������������������������������������������������������������������������������������������������15 5� Timing of Warranty Services ���������������������������������������������������������������������������������������������������15 6� General Maintenance and Repairs �����������������������������������������������������������������������������������������15 Warranty Request Form ��������������������������������������������������������������������������������������������������������������16 www.stoddart.com.au Page 2 Due to continuous product research and development, the information contained herein is subject to change without notice.
Your New Woodson Product Thank you for choosing this quality Stoddart Woodson product. All our products are designed and made to meet the needs of food service professionals. By using, caring and maintaining your product according to these instructions, your Woodson product should give you many years of reliable service.
The manufacturer declines any liability for damages to persons and/or things due and to an improper/wrong and/or unreasonable use of the machine Service • Only specifi cally trained/qualifi ed Technicians (Stoddart, one of our service agents, or a similarly qualifi ed persons) should carry out any and all repairs, maintenance and services www.stoddart.com.au Page 4 Due to continuous product research and development, the information contained herein is subject to change without notice.
(if the unit is near any heat sensitive material we suggest you allow additional space) • Please consult national and local standards to ensure that your unit is positioned in accordance with any existing requirement www.stoddart.com.au Page 5 Due to continuous product research and development,...
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualifi ed persons in order to avoid a hazard. Please contact Stoddart for parts and we will advise how to do this in order to avoid any electrical hazard •...
415mm 495mm Depth 540mm 475mm Power 2.2kW 2.2kW AMPS 10A plug & lead fitted 10A plug & lead fitted W.CT6 www.stoddart.com.au Page 7 Due to continuous product research and development, the information contained herein is subject to change without notice.
Specification W.CT8 475 Plate width www.stoddart.com.au Page 8 Due to continuous product research and development, the information contained herein is subject to change without notice.
Page 10
Page Intentionally Left Blank www.stoddart.com.au Page 9 Due to continuous product research and development, the information contained herein is subject to change without notice.
The temperature of the plates can be adjusted by using the thermostat knob located on the front of the unit After Hours • The unit MUST be switched OFF www.stoddart.com.au Page 10 Due to continuous product research and development, the information contained herein is subject to change without notice.
Wait until the unit has cooled to a safe temperature before undertaking any cleaning or maintenance. Contact with hot surfaces can cause burns and serious injury. www.stoddart.com.au Page 11 Due to continuous product research and development, the information contained herein is subject to change without notice.
Note: In some areas, particularly seaside environments, stainless steel can be subject to surface discolouration or “tea staining” This can be removed with an appropriate cleaning agent which contains 10% sodium citrate. Ask your supplier of cleaning chemicals for a suitable brand. www.stoddart.com.au Page 12 Due to continuous product research and development,...
Plates not Hot Element failure Test & replace the element if necessary Food Cooking unevenly Incorrect thermostat setting Choose appropriate setting www.stoddart.com.au Page 13 Due to continuous product research and development, the information contained herein is subject to change without notice.
Proper maintenance and cleaning of equipment in accordance with the Instructions is essential to the equipment’s effective operation; vii. On site warranty services are limited to sites within 50km from the nearest Stoddart authorised service agent and service agent’s reasonable travel costs must be paid by Customer prior to the commencement of the repairs;...
Transportation costs associated with transporting the equipment to a Stoddart authorized service agent where Stoddart considers (acting reasonably) that repairs cannot be undertaken on-site; and Unless agreed to by Stoddart in writing to the contrary, warranty is not included in the sale price for goods sold to or installed in an overseas location. 4. Warranty Claim Procedure The following procedure must be followed to claim under Stoddart’s warranties:...
To ensure we can provide the best possible service we require you to complete this form. Make, model and serial number, along with other essential information. To secure a call, you must also have an account with Stoddart or complete the credit card details below.
Page 18
Notes www.stoddart.com.au Page 17 Due to continuous product research and development, the information contained herein is subject to change without notice.
Page 19
Notes www.stoddart.com.au Page 18 Due to continuous product research and development, the information contained herein is subject to change without notice.
Page 20
Stoddart Sales Servicing and Replacement Sales Department Tel: 1300 791 954 Fax: (07) 3344 1000 Email: fseorders@stoddart.com.au Service & Spares Department Tel: 1300 307 289 Email: service@stoddart.com.au Email: spares@stoddart.com.au...
Need help?
Do you have a question about the Woodson W.CT6 and is the answer not in the manual?
Questions and answers