Table of Contents
Advertisement
Quick Links
vsm TTP10
User Manual
Version: 4.0/1
Edition: 31 March 2017
Revision History
Version
1
2
4.0/1
Copyright
All rights reserved. Permission to reprint or electronically reproduce any document or graphic in whole or in part
for any reason is expressly prohibited, unless prior written consent is obtained from the Lawo AG.
All trademarks and registered trademarks belong to their respective owners. It cannot be guaranteed that all
product names, products, trademarks, requisitions, regulations, guidelines, specifications and norms are free from
trade mark rights of third parties.
All entries in this document have been thoroughly checked; however no guarantee for correctness can be given.
Lawo AG cannot be held responsible for any misleading or incorrect information provided throughout this manual.
Lawo AG reserves the right to change specifications at any time without notice.
© Lawo AG, 2017
To obtain the latest documentation and software downloads, please visit:
www.lawo.com/downloads
Edition
2014-05-20
2014-06-13
2017-03-31
New Overview graphics & template
Changes
Initial draft
Initial Release
Firm w are Version
0.11
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LAWO vsm TTP10
Summary of Contents for LAWO vsm TTP10
- Page 1 All rights reserved. Permission to reprint or electronically reproduce any document or graphic in whole or in part for any reason is expressly prohibited, unless prior written consent is obtained from the Lawo AG. All trademarks and registered trademarks belong to their respective owners. It cannot be guaranteed that all product names, products, trademarks, requisitions, regulations, guidelines, specifications and norms are free from trade mark rights of third parties.
-
Page 2: Table Of Contents
Welcome ............................3 Important Safety Instructions ......................4 Introduction ............................6 Overview ............................7 Operating Conditions ........................8 Preparing for Operation ........................9 Technical Specifications ........................10 Connectors .......................... 10 Cleaning the Display ........................11 2/11 Version: 4.0/1 vsm TTP10 User Manual... -
Page 3: Welcome
TTP10 Welcome About this Manual This document describes how to install and setup the vsm TTP10 within a VSM system. Note that a system may comprise several software and hardware components. Other useful documents include the: · vsm Software User Manual - more about vsmStudio, the main configuration and administration tool, plus other software components: vsmPanel, vsmWebPanel, vsmTimeSync, etc. -
Page 4: Important Safety Instructions
Servicing unprotected powered devices may only be carried out by qualified service personnel at their own risk. The following instructions MUST be observed: · NEVER touch bare wires or circuitry. · Use insulated tools ONLY. · DO NOT touch metal semi-conductor casings as they can bear high voltages. 4/11 Version: 4.0/1 vsm TTP10 User Manual... - Page 5 Defective Parts/Modules Warning vsm TTP10 contains no user-serviceable parts. Therefore DO NOT open the devices other than to perform the procedures described in this manual. In the event of a hardware defect, please send the system component to your local service representative together with a detailed description of the fault.
-
Page 6: Introduction
TTP10 Introduction The vsm TTP10 has been designed as an alternative to the LBP series. In addition to touch-panel button operations, the TTP10 offers meter monitoring and the freedom of using virtual faders. The touch panel has been developed specifically for use with vsmStudio in OB vans and studios. The use of embedded components and an adapted embedded operating system guarantee a robust, maintenance-free and long-living system that meets the high requirements of mobile and stationary applications. -
Page 7: Overview
1 x Ethernet Dimensions 260 x 210 x 65 (WxHxD) when f olded down to 0 degrees including pedestal Weight approx. 3,2KG Power Consumption <25W @12VDC/2,01A max Working Env ironment 0°C-50°C non-condensing humidity vsm TTP10 User Manual Version: 4.0/1 7/11... -
Page 8: Operating Conditions
DO NOT throw, drop or bend the unit and make sure that there is no strong permanent mechanical pressure on any side of the housing at any time. Before installing or using this device, always read and observe the Important Safety Instructions. 8/11 Version: 4.0/1 vsm TTP10 User Manual... -
Page 9: Preparing For Operation
All Lawo vsm devices will be shipped with DHCP enabled network configuration. If you don’t have a DHCP network ask your administrator for static network settings and edit the “Network” section if required. -
Page 10: Technical Specifications
100m (328ft) between the device and network-switch for 100BASE-T communication. Make sure to do proper wiring and use shielded RJ45-plugs for shielded cable on both ends of the line. 10/11 Version: 4.0/1 vsm TTP10 User Manual... -
Page 11: Cleaning The Display
The best way to clean the display of TTP10 is to use a soft cloth and smooth window-cleaner-fluid. Do not expose the window-cleaner directly to the display, but to the cloth and then wipe softly over display. vsm TTP10 User Manual Version: 4.0/1...
Need help?
Do you have a question about the vsm TTP10 and is the answer not in the manual?
Questions and answers