Drawell International Technology Limited 1 . product overview The ultrasonic cleaning machine uses the cavitation effect of ultrasonic waves in the cleaning liquid to accelerate the dissolution and stripping of dirt, grease and other dirt in the inner holes and blind holes of the cleaned utensils. The...
② Carefully inspect the appearance of all components for cracks, bruises, or deformations Quantity Model Ultrasonic cleaner 1 set Basket Cover Drain pipe 1 copy manual Table 4-1 Unpacking list of DTS series ultrasonic cleaner After confirming that the accessories are complete, the instrument can be...
Page 5
Drawell International Technology Limited installed according to the requirements of this manual. 4.2 Instrument installation Place the instrument: The instrument should be placed on a dry and horizontal table, avoid direct sunlight, and prohibit contact with corrosive substances. The line connection is correct and meets the exhaust requirements.
Drawell International Technology Limited Optical Instruments (5-10) % Optics Cleaner Optical glass Magnetic material magnetic material (5-10) % detergent Gold and Silver, Jewelry, Platinum Jewel detergent (5-10)% Table 4-2-1 Cleaning solution reference table ② Put the cleaning material into the cleaning tank ③...
Page 7
Drawell International Technology Limited mode, the last digit of "108" in the ultrasonic timing window is flashing, press keys to add or subtract the parameter. After the total ultrasonic working time is set, press the <SET> key to enter the temperature setting.
Drawell International Technology Limited the operation is completed. Return to the standby state. During the start-up process of ultrasound, press the <ultrasound> key to stop the ultrasound. start temperature control: Press the <heating> key to perform automatic temperature control. Description of ATC symbols...
Page 9
Drawell International Technology Limited Figure 5-3 interface diagram ① Workfreq: ultrasonic working frequency display window ② Power: ultrasonic power setting window ③ Timing: Ultrasound timing setting window ④ TEM Setting: temperature setting window ⑤ Meas.TEM : actual temperature in the tank ⑥...
Page 10
Drawell International Technology Limited ④ Cleaning time : The longer the cleaning time, the better the effect, except for special materials . ⑤ Other factors: There are many influencing factors, such as the type and nature of cleaning fluid and dirt, and so on.
Need help?
Do you have a question about the DTS Series and is the answer not in the manual?
Questions and answers