• This product complies with Australian Safety Standards AS/NZS 3105, AS/NZS 62368.1. • If the power board or cord is damaged, contact help.Kogan.com for support. Do not attempt to open the board or replace the cord. The cord must be replaced by appropriately qualified personnel.
Page 4
• Unpack the power board and keep the original packaging in a safe place. Reuse the original packaging when storing or transporting the power board to prevent damage. • When not in use, disconnect from the power source and store in a cool, dry, and well- ventilated location out of direct sunlight and not subject to humidity.
Page 5
OVERVIEW Overload Circuit Breaker Protects against current overload at 10 amps. (Resettable) Surge Protection LED When illuminated green, all connected devices Indicator are surge protected. Power Switches Each switch controls 3 outlets. Surge Protected Electrical The 3 outlets controlled by the same Power Outlets switch can be used interchangeably.
CLEANING & CARE • Only use a soft, dry cloth for cleaning the product; do not use a damp cloth. • Never clean with industrial strength polish, wax, benzene, paint thinner, air freshener, lubricant, detergent or other chemicals. • Wipe off any moisture, dirt or dust on the power outlets and plug pins with a clean, dry cloth.
TROUBLESHOOTING • Ensure the correct power switch is turned on; each switch controls 3 outlets. No power output from • Verify if the other outlets controlled by the same switch one of the outlets. are functional. If they are, the issue may be due to a loose or disconnected contact in the faulty outlet.
Page 8
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the KAPB6P2SWTA and is the answer not in the manual?
Questions and answers