Summary of Contents for Detecto APSFS
- Page 1 APSFS FOOT SWITCH ZERO Installation Manual 8527-0580-0M Rev A APSFS INSTALLATION...
-
Page 2: Fcc Compliance Statement
Please do your part by making certain that this device is properly disposed of. The symbol shown to the right indicates that this device must not be disposed of in unsorted municipal waste programs. 8527-0580-0M Rev A APSFS INSTALLATION... -
Page 3: Installation
2. The switch controller cable wires are to be connected to the (P3) terminal block on the APSFS. Refer to Figure No. 1 for an illustration of the connector layout. 3. Referring to the labels on the APSFS and the table below, connect each wire to the terminal block. -
Page 4: Operation
7. The scale is ready for normal use. OPERATION The APSFS Foot Switch has an approximately 9 foot cable to allow it to be placed in a convenient position for the operator. NOTE: Ensure that the cable is out of normal traffic. -
Page 5: Statement Of Limited Warranty
(2) years from date of shipment. Detecto shall be the sole judge of what constitutes a defect. - Page 6 DETECTO 102 E. Daugherty, Webb City, MO 64870 USA Ph: 417-673-4631 or 1-800-641-2008 Fax: 417-673-2153 www.Detecto.com Technical Support: 1-866-254-8261 E-mail: tech@cardet.com Printed in USA 4 8 527-0580-0M Rev A 12/14 8527-0580-0M Rev A APSFS INSTALLATION...
Need help?
Do you have a question about the APSFS and is the answer not in the manual?
Questions and answers