Vernier KidWind KW-PGBRAC Quick Start Manual

KidWind Photogate Bracket
Order Code KW-PGBRAC
The KidWind Photogate Bracket attaches a Vernier photogate to
a KidWind Nacelle* (order code KW-NAC, not included). With
this addition, you can count the rotations per minute (RPMs) of a
blade set. For more information, visit:
www.vernier.com/kw-pgbrac
*Compatible with nacelles manufactured after December 2021
What's Included
 KidWind Photogate Bracket
 1/4-20, 1" screw
 1/4-20, 7/16" screw
 1/4-20, hex nut
Assembly Instructions
1. Use the 1" screw and the nut to attach the bracket to the top
of the nacelle.
2. Connect the photogate to the bracket with the 7/16" screw.
3. Position the photogate so that the beam is blocked and
unblocked by the holes in a rotating 64-tooth gear.
KidWind Photogate Bracket
Order Code KW-PGBRAC
The KidWind Photogate Bracket attaches a Vernier photogate to
a KidWind Nacelle* (order code KW-NAC, not included). With
this addition, you can count the rotations per minute (RPMs) of a
blade set. For more information, visit:
www.vernier.com/kw-pgbrac
*Compatible with nacelles manufactured after December 2021
What's Included
 KidWind Photogate Bracket
 1/4-20, 1" screw
 1/4-20, 7/16" screw
 1/4-20, hex nut
Assembly Instructions
1. Use the 1" screw and the nut to attach the bracket to the top
of the nacelle.
2. Connect the photogate to the bracket with the 7/16" screw.
3. Position the photogate so that the beam is blocked and
unblocked by the holes in a rotating 64-tooth gear.
KidWind Photogate Bracket
Order Code KW-PGBRAC
The KidWind Photogate Bracket attaches a Vernier photogate to
a KidWind Nacelle* (order code KW-NAC, not included). With
this addition, you can count the rotations per minute (RPMs) of a
blade set. For more information, visit:
www.vernier.com/kw-pgbrac
*Compatible with nacelles manufactured after December 2021
What's Included
 KidWind Photogate Bracket
 1/4-20, 1" screw
 1/4-20, 7/16" screw
 1/4-20, hex nut
Assembly Instructions
1. Use the 1" screw and the nut to attach the bracket to the top
of the nacelle.
2. Connect the photogate to the bracket with the 7/16" screw.
3. Position the photogate so that the beam is blocked and
unblocked by the holes in a rotating 64-tooth gear.
KidWind Photogate Bracket
Order Code KW-PGBRAC
The KidWind Photogate Bracket attaches a Vernier photogate to
a KidWind Nacelle* (order code KW-NAC, not included). With
this addition, you can count the rotations per minute (RPMs) of a
blade set. For more information, visit:
www.vernier.com/kw-pgbrac
*Compatible with nacelles manufactured after December 2021
What's Included
 KidWind Photogate Bracket
 1/4-20, 1" screw
 1/4-20, 7/16" screw
 1/4-20, hex nut
Assembly Instructions
1. Use the 1" screw and the nut to attach the bracket to the top
of the nacelle.
2. Connect the photogate to the bracket with the 7/16" screw.
3. Position the photogate so that the beam is blocked and
unblocked by the holes in a rotating 64-tooth gear.