Advertisement
Advertisement
Table of Contents
Summary of Contents for Soundavo HP-DAC1
- Page 1 DIGITAL HP-DAC1 TO ANALOG CONVERTER OWNERS MANUAL...
- Page 2 Thank you for purchased Soundavo product. Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. WARNING 1. Do not place or install this device in an area where it can be exposed to excessive amounts of dust, humidity, oil, smoke, or combustible vapors.
-
Page 3: Front Panel
CD or DVD players. 7. S/PDIF Out (optical): The S/PDIF output supports digital surround multichannel formats such as AC3 / DTS. The volume can not be adjusted on the HP-DAC1 and must be controlled on the external signal source. -
Page 4: Using The Product
USING THE PRODUCT 1. Connect an analogue signal source whose signals you want to digitize and / or listen to via headphones to the Line IN jacks ( 11 ). 2. Connect the S/PDIF Out socket ( 7 ) or the USB port ( 8 ) to the digital inputs of the devices to which the signals are to be applied. -
Page 5: Computer Connection And Settings
Connect the HP-DAC1 and your computer using the supplied USB cable. After making connection, the computer recognizes the HP-DAC1 and automatically adds it to the list of sound output devices. 2) Select “Sound” to open the “Sound” window and select “Output” tab at the top of the window. -
Page 6: Detail Settings
Control panel. sampling rate, etc. 2) Select “Audio” tab in the “Sound and Audio De- vice Properties” window. 3) Select “HP-DAC1” as the default device for playback and click the “OK” button. HP-DAC1 • Windows XP Clicking the “Advanced” button on the “Sound and Audio Device Properties”...
Need help?
Do you have a question about the HP-DAC1 and is the answer not in the manual?
Questions and answers