Advertisement
Quick Links
Installation Instructions
There are 4 brackets and fasteners used with the heater. Furthermore, in the groove
at the back of the heater, there are 4 square fastener washers (0.98*0.98 inch).
Relieve square washers and fasten 2 brackets to the groove at the back of the
heater with screws.
1. Fasten two brackets at the appropriate distance between each other (18-22 inch).
2. Two other brackets are fastened with fasteners at the appropriate distance on the
wall parallel to the floor (at the position at least 71 inch up from the floor and at
least 20 inch below the ceiling).
Advertisement
Related Manuals for Trustech B098X7R9Q7
Summary of Contents for Trustech B098X7R9Q7
- Page 1 Installation Instructions There are 4 brackets and fasteners used with the heater. Furthermore, in the groove at the back of the heater, there are 4 square fastener washers (0.98*0.98 inch). Relieve square washers and fasten 2 brackets to the groove at the back of the heater with screws.
- Page 2 3. Join the brackets on the heater with the brackets fastened on the wall with figured screw-nuts. Install the heater at the appropriate angle (in the direction of the area to be heated). 4. Electric wiring for the heater has to be done by a qualified specialist. 5.
Need help?
Do you have a question about the B098X7R9Q7 and is the answer not in the manual?
Questions and answers