Advertisement
Quick Links
2
sPro
Latch Locking System
1
Step 1
Unlock tabs.
Adjustable Feet:
Extend feet to
match phone
width
DISCLAIMER: The sticky suction mount is only recommended for hard, flat
surfaces. A semi-permanent or permanent indentation may occur if used on
surfaces made of soft leather, vinyl, or similar materials. iBOLT is not responsible
for any damages caused to your dashboard due to the installation or use of the
sticky suction mount. Do not install any mount or holder over an airbag cover or
within the airbag deployment zone.
Kit
Attach Suction Mount to Vehicle Dock:
Insert the suction mount to the back of the sPro 2.
Use the tightening ring to create a firm fit.
2
Step 2
Slide latch to
desired height.
Insert Phone
Insert phone by
pushing latch
upwards
Dashboard Mounting:
Clean surface. If surface is hard,
attach mount directly to
dashboard. For soft surface, use
dashboard disc.
IBU-33415
3
Step 3
Lock tabs.
Advertisement
Summary of Contents for iBOLT sPro2 Kit Combo
- Page 1 DISCLAIMER: The sticky suction mount is only recommended for hard, flat surfaces. A semi-permanent or permanent indentation may occur if used on surfaces made of soft leather, vinyl, or similar materials. iBOLT is not responsible for any damages caused to your dashboard due to the installation or use of the sticky suction mount.
- Page 2 IBU-33415 ibolt.co/33415 Product Support and Contact Information www.ibolt.co/contact Product Images www.ibolt.co/ibu-33414 Follow Us! facebook.com/iboltproducts @ibolt_co youtube.com/iboltproducts Free Driving App Included Go to Google Play and download the “iBOLT Dock’n Drive” free application for maximum use of your dock.
Need help?
Do you have a question about the sPro2 Kit Combo and is the answer not in the manual?
Questions and answers