Subscribe to Our Youtube Channel
Related Manuals for LAWN STAR LSGS 2860
Summary of Contents for LAWN STAR LSGS 2860
- Page 1 LSGS 2860 Original operating instructions Electric quiet shredder Art.-Nr.: 20-42860 EH-Art.-Nr.: 34.306.39 I.-Nr.: 21013 Anl_LSGS_2860_SPK7.indb 1 Anl_LSGS_2860_SPK7.indb 1 15.01.2024 09:14:25 15.01.2024 09:14:25...
- Page 2 16 17 - 2 - Anl_LSGS_2860_SPK7.indb 2 Anl_LSGS_2860_SPK7.indb 2 15.01.2024 09:14:26 15.01.2024 09:14:26...
- Page 3 11+13 12 +13 - 3 - Anl_LSGS_2860_SPK7.indb 3 Anl_LSGS_2860_SPK7.indb 3 15.01.2024 09:14:28 15.01.2024 09:14:28...
- Page 4 0,5 – 1 mm - 4 - Anl_LSGS_2860_SPK7.indb 4 Anl_LSGS_2860_SPK7.indb 4 15.01.2024 09:14:33 15.01.2024 09:14:33...
- Page 5 Before working on the cutting tool, pull out the main plug! - 5 - Anl_LSGS_2860_SPK7.indb 5 Anl_LSGS_2860_SPK7.indb 5 15.01.2024 09:14:37 15.01.2024 09:14:37...
-
Page 6: Safety Regulations
• Danger! Make sure that the shredder is properly When using the equipment, a few safety pre- closed (loading funnel and ejector) before you cautions must be observed to avoid injuries and start up the motor. • damage. Please read the complete operating The shredder must be placed on a flat and instructions and safety regulations with due care. - Page 7 not only create a potential hazard, it will also for the cutter to come to a standstill. Each result in the loss of your rights under the time before you leave the machine, switch off warranty. the motor and pull out the power plug. Before you connect the machine to the power supply, •...
-
Page 8: Layout And Items Supplied
in the vicinity of a wall or any other ridged ob- ris box: The switch is in the “Lock is closed” ject) position: The shredded material debris box is • Damaged or illegible labels must be replaced locked. The shredder can be switched on. The •... -
Page 9: Proper Use
• Remove the packaging material and any Operating mode P40: Continuous operation with packaging and/or transportation braces (if idling (cycle time 10 minutes). To ensure that the available). motor does not become excessively hot it may • Check to see if all items are supplied. only be operated for 40% of the cycle at the spe- •... -
Page 10: Operation
To do so, fi t one washer in front of the tubular green knob of the ON/OFF switch. The blade will rod and one behind it. Press the wheel caps start to rotate in the opposite direction. As soon onto the wheels (Fig. 9). as you release the ON/OFF switch, the shredder 3. -
Page 11: Replacing The Power Cable
roughly shredded before loading any more IMPORTANT: If the shredding blade touches the material. counter blade, it will cut it and small metal chips • Do not allow the discharge opening to be- may fall out of the discharge opening. This is not come clogged with shredded material –... -
Page 12: Cleaning, Maintenance And Ordering Of Spare Parts
8. Cleaning, maintenance and 9. Disposal and recycling ordering of spare parts The equipment is supplied in packaging to pre- vent it from being damaged in transit. The raw Danger! materials in this packaging can be reused or Always pull out the mains power plug before star- recycled. -
Page 13: Troubleshooting
11. Troubleshooting Fault Possible cause Remedy The motor does not - Power failure - Check the mains lead, plug and start fuse. - Motor circuit breaker has been trig- - Press the Reset button (see point gered 6.5) - The safety switch is not making - Insert the debris box correctly and contact push the safety switch upwards un-... -
Page 14: Service Information
Service information We have competent service partners in all countries named on the guarantee certifi cate whose contact details can also be found on the guarantee certifi cate. These partners will help you with all service re- quests such as repairs, spare and wearing part orders or the purchase of consumables. Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables. -
Page 15: Warranty Card
PHONE : PHONE: LIMITED DOMESTIC USE WARRANTY Lawn Star (Pty) Ltd. guarantees this unit to be free from defects in material and workmanship. If any such defect should become apparent during a period of 12 MONTHS from the date of the original purchase, we undertake to repair this unit free of charge or replace this unit with a factory reconditioned unit at our discretion. - Page 16 LAWN STAR ( PTY ) LTD. For service and warranty repairs please contact your nearest Service Agent listed below: CUSTOMER CARE : 0860-LAWNSTAR HEAD OFFICE : 98 Bofors Circle, Epping 2 South, Cape Town PO Box 496, Parow, 7499 Tel: 021-535-5249...
- Page 17 - 17 - Anl_LSGS_2860_SPK7.indb 17 Anl_LSGS_2860_SPK7.indb 17 15.01.2024 09:14:41 15.01.2024 09:14:41...
- Page 18 EH 01/2024 (01) Anl_LSGS_2860_SPK7.indb 18 Anl_LSGS_2860_SPK7.indb 18 15.01.2024 09:14:41 15.01.2024 09:14:41...
Need help?
Do you have a question about the LSGS 2860 and is the answer not in the manual?
Questions and answers